Trainz/containers/soundscript container

Trainz Annotated References

TOC | Beginnings | Fun | AM&C | Creation | InBook Refs | ORP Refs:  • Index • Containers • Kinds • Tags | Appendixes  • Vers

Glossary

HKeys-CM

HKeys-DVR

HKeys-SUR

HKeys-WIN

Mouse use

Notations

A container type tag for defining asset sounds. Soundscript containers have the ability to control 'relative loudness', fading range, randomness-ranges, and to have a specific trigger.

Supported Tags

Each soundscript subcontainer supports the following tags. Each tag is shown here with its default value.

Specification vs. Example
Specification
soundscript (container) { soundscript-ID (Optional-Name) repeat-delay 0,0 distance 50,150 ambient 0 attachment "" nostartdelay 0 priority 1 trigger "" volume 1 value-range 0,0 sound { } }
Simple example
soundscript { dayloop (optional name) { ambient 1 repeat-delay 20,25 distance 10,100 sound (subcontainer) { dogbark.wav lildogbark.wav bigdogbark.wav dogsallbark.wav } } } (adapted: KB dogbark,<kuid:52682:39098>)

 

• In the above example, the asset in all likelihood would only be heard once, unless stopped nearby (station, siding?), and the sound from the list is picked at random, so would give variation to such stopped ears to hear.

 

ambient

Type: Boolean — values other than 1 & 0 generate a Fault message!

Default: 0

Compulsory: No

Desc: If true this is an 'ambient' sound, ambient sounds are played in 2D and do not make use of 3D positioning in the world other than to affect volume. Unlike positional sounds, ambient sounds may be stereo.

attachment

Type: Attachment point

Default: ""

Compulsory: No

Desc: Point to attach the sound source to. Attachment points are specified in the mesh file during creation.

Why should a sound not have an attachment point, asks Matilda, Georgie, and Millicent. Why when the sound is placed as 'audible scenery' about the route trackage by the route-builder, much as he might place a tree. Like a visual effect, a sound effect is used by the modeler to give a taste, and impression of reality— for no two second sound file can mimic the reality of continuous sound.  

distance

Type: Decimal Pair — meters: radius_Begin_fading, radius_cut_off_&_stop

Default: 50,150

Compulsory: No

Desc: Distance range from the source, in meters, where the sound is audible.

• The minimum distance defines the radius within which the sound remains at 100% volume.
• Beyond that distance, the sound volume will begin to decay naturally.
• The maximum distance defines a radius beyond which the game will no longer play the sound. This does not mean that the sound fading out behavior is scaled to this value so that it will fade to zero by the maximum distance, but rather that the sound will cut off abruptly at that point.Tip: It is up to the content creator to choose an appropriate distance - smaller is better for performance, because the sooner an assets radius of effect is passed, the sooner the CPU's process flow can drop it from the loop cycle and give attention to other things. Frame Rate Griper's take note! That nifty sound has a cost.

nostartdelay

Type: Boolean

Default: 0

Compulsory: No

Desc: If added and true this tag specifies that the sound will play immediately once triggered. By default sounds have a random start delay between 0 & 4 seconds. Start delay should be left active in most cases, as turning it off may cause significant audio artifacts when several identical sounds are in proximity.

priority

Type: Integer

Desc: Sets the priority of the sound, if their are not enough sound channels available higher priority sounds will be played first. Defaults to 1, can be negative.

repeat-delay

Type: Decimal Pair

Default: 0,0

Compulsory: Yes (3.4)

Desc: Time range (in seconds) to delay, after the sound finishes playing, before playing the sound again. To set a constant delay either set both these values the same or only provide one of them, otherwise a random value between them will be chosen. When used with a trigger event (see the 'trigger' tag), a positive value indicates that the sound should not repeat, but should wait until triggered again.

sound

Type: Container

Default: {}

Compulsory: Yes

Desc: Contains a key/string list of the sound files to play. If the list has more than one entry then one file will be picked at random from the list. The value of each tag in this container is the filename of a WAV sound file. Filenames are relative to the base directory of the asset, i.e. relative to the location of the config file. The keys used within the list are not important: Trainz convention for lists like this is to numerically number each option from zero, and while it is strongly recommended to follow this convention, there is no technical requirement to do so.

Valid WAV files are:

• Uncompressed.
• 8 or 16 bit
• Mono, Stereo or Surround (As of build 3.7 Surround is not fully tested)

Sampling rate can be 22kHz (22,050Hz) or 44kHz (44,100Hz). The higher sampling rate doubles the size of the file for no significant improvement in quality, and is not recommended. For some purposes there are additional requirements - for instance directional sounds must be mono.

trigger

Type: String

Default: ""

Compulsory: No

Desc: The 'trigger' tag gives your sound a name that can allow it to be played from TrainzScript, animations and certain predefined events. (At least one of these "predefined events" is to use the word "toggle" when including a soundscript container in the config.txt of a "kind mojunction". This will make the sound fire each time the turnout is switched)

value-range

Type: Float pair

Default: 0,0 (off)

Compulsory: No

Desc: 2 numbers, where the numbers are not the same, which set the start and end times for the sound to play. Midnight is 0.5, midday = 0.0 or 1.0. (TBD. This is a bit vague.)

volume

Type: Decimal

Default: 1

Compulsory: No

Desc: Specifies the volume gain of the sound. Defaults to 1 (100%).

soundscript-ID

Type: stringvalue, an identifier name

Default: ""

Compulsory: No, unless there is more than one sound managed by the soundscript container. (See morning, evening example below)

Desc: Specifies the handle or text identifier of the sound used to connect to other parts of the software.

Like other container '-ID' asuffixed terms in Index_of_Tags_%26_Containers

Example Config.txt files

Sample config.txt file for a map asset that has a different day and night background sounds:

soundscript in map file

 kind map
 kuid <KUID2:497853:13052:3>
 soundscript
 {
   morning
   {
     ambient 1
     value-range 1, 0.1
     volume 0.3
     sound
     {
       0 ctry_day_1.wav
       1 ctry_day_2.wav
     }
   }
   night
   {
     ambient 1
     value-range 0, 0.9
     volume 0.3
     sound
     {
       0 night_loop.wav
     }
   }
 }

soundscript as place-able scenery sound effect

This is an actual TB v1.3 asset upgraded to V2.7 (TC1&2) —this level is a useful interim state incorporating most major necessary changes and as a check eliminating now illegal formerly useful quick classification TBS tags such as region, type, asset-name and other such discontinued keywords as autoanimation (with its' action subsumed into such structures as the mesh-table containers and the autocreate parameter).

kind                                    "scenery"
light                                   1
category-class                          "BU"
trainz-build                            2.7
username                                "KB trainannouncer sound-aRus"
category-region                         "00"
category-era                            "1960s;1970s;1980s;1990s;2000s;2010s"
description                             "username = 'KB trainannouncer sound-aRus'

--  This is a 27 second long muted platform soundtrack with indistinct but obvious near-continuous distant loudspeaker announcement.

Original description:
--  This is a sound add-on.
--  To use it you must place this object in Surveyor at or adjacent to any area that you wish to hear this sound from.

credit: Thanks to USER.RO for creating the sound regions object.  It makes the creation of objects in this package easy & quick.
original trainz-build                            1.3

Rev-A 2015-0115 - by Fabartus - update to update ranges... 
and eliminate these obsolescent tags:

asset-filename                          'KB_trainannounce'
autoanimation                           1
region                                  'AAA Sounds'
type                                    'Trains'
--------- 

This faulty asset originated in C:\TS09-SP3\UserData\editing 2014-1008

Asset foldername: kuid2 52682 39352 0;v2-6;Platform sound effect;KB Trainannouncer sound-aRus
Original folder:  C:\TS09-SP3\editing\KB trainannounce
******************************************************************************************
soundscript
{
  dayloop
  {
    repeat-delay                        20,38
    distance                            10,80
   
    sound
    {
      trainannounce.wav                 
    }
  }
} 
mesh-table {
  default {
    mesh               "invisible-platform_body.im"
   auto-create        1  }
} 
thumbnails  {
  0   {
   width 240
   height 180
   image "$Soundeffect screenshot (240).jpg"   }
}
kuid-table {
}

As a repaired asset not meant for uploading, the repairing trainzer has the option of adjusting sorting parameters such as user names, the description data, and the category-xxx parameters to suit within the limits of the asset kind. In this case, being a programmer believing in good documentation, the description block is used to track changes (a change record) since legal remarks or comments were stripped from Trainz in the TS2009 release. The example also shows both an alteration and a compliance with the author's original name: The same phrases are retained as much as possible in the same order with amplifying and clarifying words or phrases added if and as is possible, and then a change suffix '-aRus' is also routinely added. This literally means: Altered, Repaired, Upgraded, Screenshot; and the -a suffix will sort out in CM when given as a name parameter.

The above example is also used to illustrate another point--different styles of indentation are common in the C-language programming practices world. The soundscript container uses one such format convention whereas the last three containers use another common indenting method. As a rule Content Manager will decompress and generate the first forms of containers, but CM & CMP is quite tolerant of the other forms, provided a whitespace character exists between characters. In the C, C++, and C# languages, no such whitespace padding would be necessary, the brackets character itself would suffice to delimit when parsing the data elements. Trainz parsing is far less forgiving and capable.