Adventist Youth Honors Answer Book/Arts and Crafts/Soap Craft - Advanced

Soap Craft - Advanced
Arts and Crafts General Conference	Skill Level 2
Arts and Crafts General Conference	Year of Introduction: 1964

The Soap Craft - Advanced Honor is a component of the Artisan Master Award .

Contents

1. Have the Soap Craft Honor.

Instructions and tips for earning the Soap Craft honor can be found in the Arts and Crafts chapter.

2. What types of fats can be used in making soap?

Any fat that can undergo saponification can be used for making soap. Saponifiables are components of an oily (oil, fat, wax) mixture that form soaps when blended with lye.

3. What is used in making soap transparent?

Transparent soap can be made by re-melting a batch of regular, opaque soap and adding alcohol and glycerin to it. The alcohol reduces the size of the crystals that form as the soap cools, and when these crystals are small enough, they will no longer reflect light. Rather, the light will easily pass between them and the soap will appear transparent.

4. What are the advantages and disadvantages of soap and detergent?

	Advantages	Disadvantages
Soap	Biodegradable Non-polluting Effective bacteriacide	Poor performance in hard water Dries and roughens the skin Does not cleanse as well as detergent Made from vegetable oils (a human food source)
Detergent	Performs well in both hard and soft water Cleanses better than soap Made from petroleum by-products which conserves vegetable oil for human consumption	Not biodegradable Source of water and air pollution

5. What are some cleaning aids added to soap mixtures?

Abrasives

Gritty substances are added to soap to help it scrub away dirt. There are many abrasives that are used as soap additives including:

Almond meal
Bran
Cinnamon
Cornmeal
Oatmeal
Pumice (volcanic rock)
Sand
Wheat germ

Cleansers

A cleanser is used used to remove make-up, dead skin cells, oil, dirt and other types of pollutants from the skin of the face. This helps to unclog pores and prevent skin conditions such as acne. Some additives that act as cleansers include:

Cucumber
Milk (cow, goat, etc)
Witch hazel

Emollients

Emollients are substances that soften and soothe the skin. They are used to correct dryness and scaling of the skin. Additives that act as emollients include:

Honey
Glycerin
Lanolin
Rose water

Antibacterials

These additives kill bacteria. Additives that act as antibacterials include:

Lemon
Myrrh
Sage

6. What makes soap float?

Floating soaps (such as Ivory) have had air whipped into them when they were in liquid form. The air bubbles reduce the density of the final product making it lighter than an equal volume of water. Any substance that is lighter than an equal volume of water will float on water.

7. What makes soap hard?

Stearic acid is the primary soap hardener, but several additives have that effect (to a lesser degree) as well including:

Salt
Cocoa butter
Sodium lactate

8. Learn the following verses: Jeremiah 2:22, Malachi 3:2.

Jeremiah 2:22 (NIV)

Although you wash yourself with soda

and use an abundance of soap,

the stain of your guilt is still before me,"

declares the Sovereign LORD.

Malachi 3:3 (NIV)
But who can endure the day of his coming? Who can stand when he appears? For he will be like a refiner's fire or a launderer's soap.

9. Explain two methods of making soap. Make a batch of soap by one of these methods.

The two primary methods of making soap are the hot process and the cold process. In both cold-process and hot-process soapmaking, heat may be required for saponification.

Cold-process soapmaking takes place at a sufficient temperature to ensure the liquification of the fat being used. The lye and fat may be kept warm after mixing to ensure that the soap is completely saponified.

Unlike cold-processed soap, hot-processed soap can be used right away because lye and fat saponify more quickly at the higher temperatures used in hot-process soapmaking.

Hot-process soapmaking was used when the purity of lye was unreliable, and this process can use natural lye solutions, such as potash. The main benefit of hot processing is that the exact concentration of the lye solution does not need to be known to perform the process with adequate success.

Cold-process soapmaking requires exact measurements of lye and fat amounts and computing their ratio, using saponification charts to ensure that the finished product is mild and skin-friendly. Saponification charts can also be used in hot-process soapmaking, but are not as necessary as in cold-process soapmaking.

The recipe detailed below is a cold-process method.

Re-edited info from Do-It-Yourself/Soap on WikiBooks.

Making soap

Equipment

Any sort of animal or vegetable fat.
Sodium Hydroxide (NaOH), also known as lye.
Glass beaker and stirring rod.
Bunsen burner or other means of heating solution.
Mold for making soap bars (any flexible plastic container).
Vinegar, just in case.

SAFETY NOTES

Gloves, labcoat and appropriate eyewear should be worn when handling the Sodium Hydroxide (NaOH).
You should do this in a well-ventilated area, preferably in a fume hood or outdoors.
DO NOT BREATHE THE FUMES.
Wash with vinegar if you get some on your skin (have some vinegar handy before starting the experiment) - DO NOT wash with water!.
Mixing lye with water results in a chemical reaction that creates extreme heat - hence, washing lye off your hands (for example) with water will only initiate that reaction on your hand, resulting in chemical burn.

SAFETY NOTES

What to do

Place 16 oz. of any fat, such as oil or butter in a beaker.
In another container add 2.1 oz. (59.5 g) of Sodium Hydroxide (NaOH) to 6 oz. (170g) of water (do not add water to Sodium Hydroxide (NaOH) - it will splatter) stir to dissolve and let cool to 110 F.
Melt fat under low heat to 110 °F (49 °C) and add the Sodium Hydroxide (NaOH) solution while stirring until the base has completely reacted with the fat (about 20 to 30 minutes)
Pour the mixture into molds.
Let this cool and sit for a day or two. Let the soap cakes cure for three weeks before using.

Additional Soapmaking References

10. Do one of the following

a. Visit a soap-making establishment, commercial or non-commercial.

You can visit a commercial manufacturer of soaps or find a soap-making school near you.

b. Obtain information from a soap-making firm about how soap is made.

Back when this honor was first developed, it was assumed that you would probably write a letter to a soapmaker to obtain this information. Soapmakers would have information packets that they would send out in response. These days however, they put this information online. Here are a few websites with this type of information:

c. Study and prepare from an encyclopedia or another source a one- to two-page report that explains how soap is made.

The Wikipedia article on Soap is an excellent resource for this.

References

http://www.standeyo.com/News_Files/Soap/Hand_Milled_Ing.html