GLSL Programming/Unity/Many Light Sources
This tutorial introduces image-based lighting, in particular diffuse (irradiance) environment mapping and its implementation with cube maps.
This tutorial is based on Section “Reflecting Surfaces”. If you haven't read that tutorial, this would be a very good time to read it.
Diffuse Lighting by Many Lights
[edit | edit source]Consider the lighting of the sculpture in the image to the left. There is natural light coming through the windows. Some of this light bounces off the floor, walls and visitors before reaching the sculpture. Additionally, there are artificial light sources, and their light is also shining directly and indirectly onto the sculpture. How many directional lights and point lights would be needed to simulate this kind of complex lighting environment convincingly? At least more than a handful (probably more than a dozen) and therefore the performance of the lighting computations is challenging.
This problem is addressed by image-based lighting. For static lighting environments that are described by an environment map, e.g. a cube map, image-based lighting allows us to compute the lighting by an arbitrary number of light sources with a single texture lookup in a cube map (see Section “Reflecting Surfaces” for a description of cube maps). How does it work?
In this section we focus on diffuse lighting. Assume that every texel (i.e. pixel) of a cube map acts as a directional light source. (Remember that cube maps are usually assumed to be infinitely large such that only directions matter, but positions don't.) The resulting lighting for a given surface normal direction can be computed as described in Section “Diffuse Reflection”. It's basically the cosine between the surface normal vector N and the vector to the light source L:
Since the texels are the light sources, L is just the direction from the center of the cube to the center of the texel in the cube map. A small cube map with 32×32 texels per face has already 32×32×6 = 6144 texels. Adding the illumination by thousands of light sources is not going to work in real time. However, for a static cube map we can compute the diffuse illumination for all possible surface normal vectors N in advance and store them in a lookup table. When lighting a point on a surface with a specific surface normal vector, we can then just look up the diffuse illumination for the specific surface normal vector N in that precomputed lookup table.
Thus, for a specific surface normal vector N we add (i.e. integrate) the diffuse illumination by all texels of the cube map. We store the resulting diffuse illumination for this surface normal vector in a second cube map (the “diffuse irradiance environment map” or “diffuse environment map” for short). This second cube map will act as a lookup table, where each direction (i.e. surface normal vector) is mapped to a color (i.e. diffuse illumination by potentially thousands of light sources). The fragment shader is therefore really simple (this one could use the vertex shader from Section “Reflecting Surfaces”):
#ifdef FRAGMENT
void main()
{
gl_FragColor = textureCube(_Cube, normalDirection);
}
#endif
It is just a lookup of the precomputed diffuse illumination using the surface normal vector of the rasterized surface point. However, the precomputation of the diffuse environment map is somewhat more complicated as described in the next section.
Computation of Diffuse Environment Maps
[edit | edit source]This section presents some JavaScript code to illustrate the computation of cube maps for diffuse (irradiance) environment maps. In order to use it in Unity, choose Create > JavaScript in the Project View. Then open the script in Unity's text editor, copy the JavaScript code into it, and attach the script to the game object that has a material with the shader presented below. When a new cube map of sufficiently small dimensions is specified for the shader property _OriginalCube (which is labeled Environment Map in the shader user interface), the script will update the shader property _Cube (i.e. Diffuse Environment Map in the user interface) with a corresponding diffuse environment map. Note that the script only accepts cube maps of face dimensions 32×32 or smaller because the computation time tends to be very long for larger cube maps. Thus, when creating a cube map in Unity, make sure to choose a sufficiently small size.
The script includes only a handful of functions: Awake() initializes the variables; Update() takes care of communicating with the user and the material (i.e. reading and writing shader properties); computeFilteredCubemap() does the actual work of computing the diffuse environment map; and getDirection() is a small utility function for computeFilteredCubemap() to compute the direction associated with each texel of a cube map. Note that computeFilteredCubemap() not only integrates the diffuse illumination but also avoids discontinuous seams between faces of the cube map by setting neighboring texels along the seams to the same averaged color.
@script ExecuteInEditMode()
private var originalCubemap : Cubemap; // a reference to the
// environment map specified in the shader by the user
private var filteredCubemap : Cubemap; // the diffuse irradiance
// environment map computed by this script
function Update()
{
var originalTexture : Texture =
renderer.sharedMaterial.GetTexture("_OriginalCube");
// get the user-specified environment map
if (originalTexture == null)
// did the user specify "None" for the environment map?
{
if (originalCubemap != null)
{
originalCubemap = null;
filteredCubemap = null;
renderer.sharedMaterial.SetTexture("_Cube", null);
}
return;
}
else if (originalTexture == originalCubemap
&& filteredCubemap != null
&& null == renderer.sharedMaterial.GetTexture("_Cube"))
{
renderer.sharedMaterial.SetTexture("_Cube", filteredCubemap);
// set the computed diffuse environment map in the shader
}
else if (originalTexture != originalCubemap
|| filteredCubemap
!= renderer.sharedMaterial.GetTexture("_Cube"))
// has the user specified a cube map that is different of
// what we had processed previously?
{
if (EditorUtility.DisplayDialog("Processing of Environment Map",
"Do you want to process the cube map of face size "
+ originalTexture.width + "x" + originalTexture.width
+ "? (This will take some time.)",
"OK", "Cancel"))
// does the user really want to process this cube map?
{
originalCubemap = originalTexture;
if (filteredCubemap
!= renderer.sharedMaterial.GetTexture("_Cube"))
{
if (null != renderer.sharedMaterial.GetTexture("_Cube"))
{
DestroyImmediate(renderer.sharedMaterial.GetTexture(
"_Cube")); // clean up
}
}
if (null != filteredCubemap)
{
DestroyImmediate(filteredCubemap); // clean up
}
computeFilteredCubemap();
// compute the diffuse environment map
renderer.sharedMaterial.SetTexture("_Cube", filteredCubemap);
// set the computed diffuse environment map in the shader
}
else // no cancel the processing and reset everything
{
originalCubemap = null;
filteredCubemap = null;
renderer.sharedMaterial.SetTexture("_OriginalCube", null);
renderer.sharedMaterial.SetTexture("_Cube", null);
}
}
return;
}
function computeFilteredCubemap()
// This function computes a diffuse environment map in
// "filteredCubemap" of the same dimensions as "originalCubemap"
// by integrating -- for each texel of "filteredCubemap" --
// the diffuse illumination from all texels of "originalCubemap"
// for the surface normal vector corresponding to the direction
// of each texel of "filteredCubemap".
{
filteredCubemap = Cubemap(originalCubemap.width,
originalCubemap.format, true);
// create the diffuse environment cube map
var filteredSize : int = filteredCubemap.width;
var originalSize : int = originalCubemap.width;
// compute all texels of the diffuse environment
// cube map by iterating over all of them
for (var filteredFace : int = 0; filteredFace < 6; filteredFace++)
{
for (var filteredI : int = 0; filteredI < filteredSize; filteredI++)
{
for (var filteredJ : int = 0; filteredJ < filteredSize; filteredJ++)
{
var filteredDirection : Vector3 =
getDirection(filteredFace,
filteredI, filteredJ, filteredSize).normalized;
var totalWeight : float = 0.0;
var originalDirection : Vector3;
var originalFaceDirection : Vector3;
var weight : float;
var filteredColor : Color = Color(0.0, 0.0, 0.0);
// sum (i.e. integrate) the diffuse illumination
// by all texels in the original environment map
for (var originalFace : int = 0; originalFace < 6; originalFace++)
{
originalFaceDirection = getDirection(originalFace,
1, 1, 3).normalized; // the normal vector of the face
for (var originalI : int = 0; originalI < originalSize; originalI++)
{
for (var originalJ : int = 0; originalJ < originalSize; originalJ++)
{
originalDirection = getDirection(originalFace,
originalI, originalJ, originalSize);
// direction to the texel, i.e. light source
weight = 1.0 / originalDirection.sqrMagnitude;
// take smaller size of more distant texels
// into account
originalDirection = originalDirection.normalized;
weight = weight
* Vector3.Dot(originalFaceDirection,
originalDirection); // take tilt of texels
// compared to face into account
weight = weight * Mathf.Max(0.0,
Vector3.Dot(filteredDirection,
originalDirection));
// directional filter for diffuse illumination
totalWeight = totalWeight + weight;
// instead of analytically normalization,
// we just normalize to the potentially
// maximum illumination
filteredColor = filteredColor +
weight * originalCubemap.GetPixel(originalFace,
originalI, originalJ);
// add the illumination by this texel
}
}
}
filteredCubemap.SetPixel(filteredFace, filteredI,
filteredJ, filteredColor / totalWeight);
// store the diffuse illumination of this texel
}
}
}
// Avoid seams between cube faces:
// average edge texels to the same color on both sides of the seam
// (except corner texels, see below)
var maxI : int = filteredCubemap.width - 1;
var average : Color;
for (var i : int = 1; i < maxI; i++)
{
average = (filteredCubemap.GetPixel(0, i, 0)
+ filteredCubemap.GetPixel(2, maxI, maxI - i)) / 2.0;
filteredCubemap.SetPixel(0, i, 0, average);
filteredCubemap.SetPixel(2, maxI, maxI - i, average);
average = (filteredCubemap.GetPixel(0, 0, i)
+ filteredCubemap.GetPixel(4, maxI, i)) / 2.0;
filteredCubemap.SetPixel(0, 0, i, average);
filteredCubemap.SetPixel(4, maxI, i, average);
average = (filteredCubemap.GetPixel(0, i, maxI)
+ filteredCubemap.GetPixel(3, maxI, i)) / 2.0;
filteredCubemap.SetPixel(0, i, maxI, average);
filteredCubemap.SetPixel(3, maxI, i, average);
average = (filteredCubemap.GetPixel(0, maxI, i)
+ filteredCubemap.GetPixel(5, 0, i)) / 2.0;
filteredCubemap.SetPixel(0, maxI, i, average);
filteredCubemap.SetPixel(5, 0, i, average);
average = (filteredCubemap.GetPixel(1, i, 0)
+ filteredCubemap.GetPixel(2, 0, i)) / 2.0;
filteredCubemap.SetPixel(1, i, 0, average);
filteredCubemap.SetPixel(2, 0, i, average);
average = (filteredCubemap.GetPixel(1, 0, i)
+ filteredCubemap.GetPixel(5, maxI, i)) / 2.0;
filteredCubemap.SetPixel(1, 0, i, average);
filteredCubemap.SetPixel(5, maxI, i, average);
average = (filteredCubemap.GetPixel(1, i, maxI)
+ filteredCubemap.GetPixel(3, 0, maxI - i)) / 2.0;
filteredCubemap.SetPixel(1, i, maxI, average);
filteredCubemap.SetPixel(3, 0, maxI - i, average);
average = (filteredCubemap.GetPixel(1, maxI, i)
+ filteredCubemap.GetPixel(4, 0, i)) / 2.0;
filteredCubemap.SetPixel(1, maxI, i, average);
filteredCubemap.SetPixel(4, 0, i, average);
average = (filteredCubemap.GetPixel(2, i, 0)
+ filteredCubemap.GetPixel(5, maxI - i, 0)) / 2.0;
filteredCubemap.SetPixel(2, i, 0, average);
filteredCubemap.SetPixel(5, maxI - i, 0, average);
average = (filteredCubemap.GetPixel(2, i, maxI)
+ filteredCubemap.GetPixel(4, i, 0)) / 2.0;
filteredCubemap.SetPixel(2, i, maxI, average);
filteredCubemap.SetPixel(4, i, 0, average);
average = (filteredCubemap.GetPixel(3, i, 0)
+ filteredCubemap.GetPixel(4, i, maxI)) / 2.0;
filteredCubemap.SetPixel(3, i, 0, average);
filteredCubemap.SetPixel(4, i, maxI, average);
average = (filteredCubemap.GetPixel(3, i, maxI)
+ filteredCubemap.GetPixel(5, maxI - i, maxI)) / 2.0;
filteredCubemap.SetPixel(3, i, maxI, average);
filteredCubemap.SetPixel(5, maxI - i, maxI, average);
}
// Avoid seams between cube faces: average corner texels
// to the same color on all three faces meeting in one corner
average = (filteredCubemap.GetPixel(0, 0, 0)
+ filteredCubemap.GetPixel(2, maxI, maxI)
+ filteredCubemap.GetPixel(4, maxI, 0)) / 3.0;
filteredCubemap.SetPixel(0, 0, 0, average);
filteredCubemap.SetPixel(2, maxI, maxI, average);
filteredCubemap.SetPixel(4, maxI, 0, average);
average = (filteredCubemap.GetPixel(0, maxI, 0)
+ filteredCubemap.GetPixel(2, maxI, 0)
+ filteredCubemap.GetPixel(5, 0, 0)) / 3.0;
filteredCubemap.SetPixel(0, maxI, 0, average);
filteredCubemap.SetPixel(2, maxI, 0, average);
filteredCubemap.SetPixel(5, 0, 0, average);
average = (filteredCubemap.GetPixel(0, 0, maxI)
+ filteredCubemap.GetPixel(3, maxI, 0)
+ filteredCubemap.GetPixel(4, maxI, maxI)) / 3.0;
filteredCubemap.SetPixel(0, 0, maxI, average);
filteredCubemap.SetPixel(3, maxI, 0, average);
filteredCubemap.SetPixel(4, maxI, maxI, average);
average = (filteredCubemap.GetPixel(0, maxI, maxI)
+ filteredCubemap.GetPixel(3, maxI, maxI)
+ filteredCubemap.GetPixel(5, 0, maxI)) / 3.0;
filteredCubemap.SetPixel(0, maxI, maxI, average);
filteredCubemap.SetPixel(3, maxI, maxI, average);
filteredCubemap.SetPixel(5, 0, maxI, average);
average = (filteredCubemap.GetPixel(1, 0, 0)
+ filteredCubemap.GetPixel(2, 0, 0)
+ filteredCubemap.GetPixel(5, maxI, 0)) / 3.0;
filteredCubemap.SetPixel(1, 0, 0, average);
filteredCubemap.SetPixel(2, 0, 0, average);
filteredCubemap.SetPixel(5, maxI, 0, average);
average = (filteredCubemap.GetPixel(1, maxI, 0)
+ filteredCubemap.GetPixel(2, 0, maxI)
+ filteredCubemap.GetPixel(4, 0, 0)) / 3.0;
filteredCubemap.SetPixel(1, maxI, 0, average);
filteredCubemap.SetPixel(2, 0, maxI, average);
filteredCubemap.SetPixel(4, 0, 0, average);
average = (filteredCubemap.GetPixel(1, 0, maxI)
+ filteredCubemap.GetPixel(3, 0, maxI)
+ filteredCubemap.GetPixel(5, maxI, maxI)) / 3.0;
filteredCubemap.SetPixel(1, 0, maxI, average);
filteredCubemap.SetPixel(3, 0, maxI, average);
filteredCubemap.SetPixel(5, maxI, maxI, average);
average = (filteredCubemap.GetPixel(1, maxI, maxI)
+ filteredCubemap.GetPixel(3, 0, 0)
+ filteredCubemap.GetPixel(4, 0, maxI)) / 3.0;
filteredCubemap.SetPixel(1, maxI, maxI, average);
filteredCubemap.SetPixel(3, 0, 0, average);
filteredCubemap.SetPixel(4, 0, maxI, average);
filteredCubemap.Apply();
// apply all the texture.SetPixel(...) commands
}
function getDirection(face : int, i : int, j : int, size : int)
: Vector3
// This function computes the direction that is
// associated with a texel of a cube map
{
var direction : Vector3;
if (face == 0)
{
direction = Vector3(0.5,
-((j + 0.5) / size - 0.5), -((i + 0.5) / size - 0.5));
}
else if (face == 1)
{
direction = Vector3(-0.5,
-((j + 0.5) / size - 0.5), ((i + 0.5) / size - 0.5));
}
else if (face == 2)
{
direction = Vector3(((i + 0.5) / size - 0.5),
0.5, ((j + 0.5) / size - 0.5));
}
else if (face == 3)
{
direction = Vector3(((i + 0.5) / size - 0.5),
-0.5, -((j + 0.5) / size - 0.5));
}
else if (face == 4)
{
direction = Vector3(((i + 0.5) / size - 0.5),
-((j + 0.5) / size - 0.5), 0.5);
}
else if (face == 5)
{
direction = Vector3(-((i + 0.5) / size - 0.5),
-((j + 0.5) / size - 0.5), -0.5);
}
return direction;
}
As an alternative to the JavaScript code above, you can also use the following C# code.
using UnityEngine;
using UnityEditor;
using System.Collections;
[ExecuteInEditMode]
public class ComputeDiffuseEnvironmentMap : MonoBehaviour
{
public Cubemap originalCubeMap;
// environment map specified in the shader by the user
//[System.Serializable]
// avoid being deleted by the garbage collector,
// and thus leaking
private Cubemap filteredCubeMap;
// the computed diffuse irradience environment map
private void Update()
{
Cubemap originalTexture = null;
try
{
originalTexture = renderer.sharedMaterial.GetTexture(
"_OriginalCube") as Cubemap;
}
catch (System.Exception)
{
Debug.LogError("'_OriginalCube' not found on shader. "
+ "Are you using the wrong shader?");
return;
}
if (originalTexture == null)
// did the user set "none" for the map?
{
if (originalCubeMap != null)
{
renderer.sharedMaterial.SetTexture("_Cube", null);
originalCubeMap = null;
filteredCubeMap = null;
return;
}
}
else if (originalTexture == originalCubeMap
&& filteredCubeMap != null
&& renderer.sharedMaterial.GetTexture("_Cube") == null)
{
renderer.sharedMaterial.SetTexture("_Cube",
filteredCubeMap); // set the computed
// diffuse environment map in the shader
}
else if (originalTexture != originalCubeMap
|| filteredCubeMap
!= renderer.sharedMaterial.GetTexture("_Cube"))
{
if (EditorUtility.DisplayDialog(
"Processing of Environment Map",
"Do you want to process the cube map of face size "
+ originalTexture.width + "x" + originalTexture.width
+ "? (This will take some time.)",
"OK", "Cancel"))
{
if (filteredCubeMap
!= renderer.sharedMaterial.GetTexture("_Cube"))
{
if (renderer.sharedMaterial.GetTexture("_Cube")
!= null)
{
DestroyImmediate(
renderer.sharedMaterial.GetTexture(
"_Cube")); // clean up
}
}
if (filteredCubeMap != null)
{
DestroyImmediate(filteredCubeMap); // clean up
}
originalCubeMap = originalTexture;
filteredCubeMap = computeFilteredCubeMap();
//computes the diffuse environment map
renderer.sharedMaterial.SetTexture("_Cube",
filteredCubeMap); // set the computed
// diffuse environment map in the shader
return;
}
else
{
originalCubeMap = null;
filteredCubeMap = null;
renderer.sharedMaterial.SetTexture("_Cube", null);
renderer.sharedMaterial.SetTexture(
"_OriginalCube", null);
}
}
}
// This function computes a diffuse environment map in
// "filteredCubemap" of the same dimensions as "originalCubemap"
// by integrating -- for each texel of "filteredCubemap" --
// the diffuse illumination from all texels of "originalCubemap"
// for the surface normal vector corresponding to the direction
// of each texel of "filteredCubemap".
private Cubemap computeFilteredCubeMap()
{
Cubemap filteredCubeMap = new Cubemap(originalCubeMap.width,
originalCubeMap.format, true);
int filteredSize = filteredCubeMap.width;
int originalSize = originalCubeMap.width;
// Compute all texels of the diffuse environment cube map
// by itterating over all of them
for (int filteredFace = 0; filteredFace < 6; filteredFace++)
// the six sides of the cube
{
for (int filteredI = 0; filteredI < filteredSize; filteredI++)
{
for (int filteredJ = 0; filteredJ < filteredSize; filteredJ++)
{
Vector3 filteredDirection =
getDirection(filteredFace,
filteredI, filteredJ, filteredSize).normalized;
float totalWeight = 0.0f;
Vector3 originalDirection;
Vector3 originalFaceDirection;
float weight;
Color filteredColor = new Color(0.0f, 0.0f, 0.0f);
// sum (i.e. integrate) the diffuse illumination
// by all texels in the original environment map
for (int originalFace = 0; originalFace < 6; originalFace++)
{
originalFaceDirection = getDirection(
originalFace, 1, 1, 3).normalized;
//the normal vector of the face
for (int originalI = 0; originalI < originalSize; originalI++)
{
for (int originalJ = 0; originalJ < originalSize; originalJ++)
{
originalDirection = getDirection(
originalFace, originalI,
originalJ, originalSize);
// direction to the texel
// (i.e. light source)
weight = 1.0f
/ originalDirection.sqrMagnitude;
// take smaller size of more
// distant texels into account
originalDirection =
originalDirection.normalized;
weight = weight * Vector3.Dot(
originalFaceDirection,
originalDirection);
// take tilt of texel compared
// to face into account
weight = weight * Mathf.Max(0.0f,
Vector3.Dot(filteredDirection,
originalDirection));
// directional filter
// for diffuse illumination
totalWeight = totalWeight + weight;
// instead of analytically
// normalization, we just normalize
// to the potential max illumination
filteredColor = filteredColor + weight
* originalCubeMap.GetPixel(
(CubemapFace)originalFace,
originalI, originalJ); // add the
// illumination by this texel
}
}
}
filteredCubeMap.SetPixel(
(CubemapFace)filteredFace, filteredI,
filteredJ, filteredColor / totalWeight);
// store the diffuse illumination of this texel
}
}
}
// Avoid seams between cube faces: average edge texels
// to the same color on each side of the seam
int maxI = filteredCubeMap.width - 1;
for (int i = 0; i < maxI; i++)
{
setFaceAverage(ref filteredCubeMap,
0, i, 0, 2, maxI, maxI - i);
setFaceAverage(ref filteredCubeMap,
0, 0, i, 4, maxI, i);
setFaceAverage(ref filteredCubeMap,
0, i, maxI, 3, maxI, i);
setFaceAverage(ref filteredCubeMap,
0, maxI, i, 5, 0, i);
setFaceAverage(ref filteredCubeMap,
1, i, 0, 2, 0, i);
setFaceAverage(ref filteredCubeMap,
1, 0, i, 5, maxI, i);
setFaceAverage(ref filteredCubeMap,
1, i, maxI, 3, 0, maxI - i);
setFaceAverage(ref filteredCubeMap,
1, maxI, i, 4, 0, i);
setFaceAverage(ref filteredCubeMap,
2, i, 0, 5, maxI - i, 0);
setFaceAverage(ref filteredCubeMap,
2, i, maxI, 4, i, 0);
setFaceAverage(ref filteredCubeMap,
3, i, 0, 4, i, maxI);
setFaceAverage(ref filteredCubeMap,
3, i, maxI, 5, maxI - i, maxI);
}
// Avoid seams between cube faces:
// average corner texels to the same color
// on all three faces meeting in one corner
setCornerAverage(ref filteredCubeMap,
0, 0, 0, 2, maxI, maxI, 4, maxI, 0);
setCornerAverage(ref filteredCubeMap,
0, maxI, 0, 2, maxI, 0, 5, 0, 0);
setCornerAverage(ref filteredCubeMap,
0, 0, maxI, 3, maxI, 0, 4, maxI, maxI);
setCornerAverage(ref filteredCubeMap,
0, maxI, maxI, 3, maxI, maxI, 5, 0, maxI);
setCornerAverage(ref filteredCubeMap,
1, 0, 0, 2, 0, 0, 5, maxI, 0);
setCornerAverage(ref filteredCubeMap,
1, maxI, 0, 2, 0, maxI, 4, 0, 0);
setCornerAverage(ref filteredCubeMap,
1, 0, maxI, 3, 0, maxI, 5, maxI, maxI);
setCornerAverage(ref filteredCubeMap,
1, maxI, maxI, 3, 0, 0, 4, 0, maxI);
filteredCubeMap.Apply(); //apply all SetPixel(..) commands
return filteredCubeMap;
}
private void setFaceAverage(ref Cubemap filteredCubeMap,
int a, int b, int c, int d, int e, int f)
{
Color average =
(filteredCubeMap.GetPixel((CubemapFace)a, b, c)
+ filteredCubeMap.GetPixel((CubemapFace)d, e, f)) / 2.0f;
filteredCubeMap.SetPixel((CubemapFace)a, b, c, average);
filteredCubeMap.SetPixel((CubemapFace)d, e, f, average);
}
private void setCornerAverage(ref Cubemap filteredCubeMap,
int a, int b, int c, int d, int e, int f, int g, int h, int i)
{
Color average =
(filteredCubeMap.GetPixel((CubemapFace)a, b, c)
+ filteredCubeMap.GetPixel((CubemapFace)d, e, f)
+ filteredCubeMap.GetPixel((CubemapFace)g, h, i)) / 3.0f;
filteredCubeMap.SetPixel((CubemapFace)a, b, c, average);
filteredCubeMap.SetPixel((CubemapFace)d, e, f, average);
filteredCubeMap.SetPixel((CubemapFace)g, h, i, average);
}
private Vector3 getDirection(int face, int i, int j, int size)
{
switch (face)
{
case 0:
return new Vector3(0.5f,
-((j + 0.5f) / size - 0.5f),
-((i + 0.5f) / size - 0.5f));
case 1:
return new Vector3(-0.5f,
-((j + 0.5f) / size - 0.5f),
((i + 0.5f) / size - 0.5f));
case 2:
return new Vector3(((i + 0.5f) / size - 0.5f),
0.5f, ((j + 0.5f) / size - 0.5f));
case 3:
return new Vector3(((i + 0.5f) / size - 0.5f),
-0.5f, -((j + 0.5f) / size - 0.5f));
case 4:
return new Vector3(((i + 0.5f) / size - 0.5f),
-((j + 0.5f) / size - 0.5f), 0.5f);
case 5:
return new Vector3(-((i + 0.5f) / size - 0.5f),
-((j + 0.5f) / size - 0.5f), -0.5f);
default:
return Vector3.zero;
}
}
}
Complete Shader Code
[edit | edit source]As promised, the actual shader code is very short; the vertex shader is a reduced version of the vertex shader of Section “Reflecting Surfaces”:
Shader "GLSL shader with image-based diffuse lighting" {
Properties {
_OriginalCube ("Environment Map", Cube) = "" {}
_Cube ("Diffuse Environment Map", Cube) = "" {}
}
SubShader {
Pass {
GLSLPROGRAM
// Uniform specified by the user or by a script
uniform samplerCube _Cube; // the diffuse environment map
// The following built-in uniforms
// are also defined in "UnityCG.glslinc",
// i.e. one could #include "UnityCG.glslinc"
uniform mat4 _World2Object; // inverse model matrix
// Varyings
varying vec3 normalDirection;
#ifdef VERTEX
void main()
{
mat4 modelMatrixInverse = _World2Object; // unity_Scale.w
// is unnecessary because we normalize vectors
normalDirection = normalize(vec3(
vec4(gl_Normal, 0.0) * modelMatrixInverse));
gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex;
}
#endif
#ifdef FRAGMENT
void main()
{
gl_FragColor = textureCube(_Cube, normalDirection);
}
#endif
ENDGLSL
}
}
}
Changes for Specular (i.e. Glossy) Reflection
[edit | edit source]The shader and script above are sufficient to compute diffuse illumination by a large number of static, directional light sources. But what about the specular illumination discussed in Section “Specular Highlights”, i.e.:
First, we have to rewrite this equation such that it depends only on the direction to the light source L and the reflected view vector R:
With this equation, we can compute a lookup table (i.e. a cube map) that contains the specular illumination by many light sources for any reflected view vector R. In order to look up the specular illumination with such a table, we just need to compute the reflected view vector and perform a texture lookup in a cube map. In fact, this is exactly what the shader code of Section “Reflecting Surfaces” does. Thus, we actually only need to compute the lookup table.
It turns out that the JavaScript code presented above can be easily adapted to compute such a lookup table. All we have to do is to change the line
weight = weight * Mathf.Max(0.0,
Vector3.Dot(filteredDirection, originalDirection));
// directional filter for diffuse illumination
to
weight = weight * Mathf.Pow(Mathf.Max(0.0,
Vector3.Dot(filteredDirection, originalDirection)), 50.0);
// directional filter for specular illumination
where 50.0 should be replaced by a variable for . This allows us to compute lookup tables for any specific shininess. (The same cube map could be used for varying values of the shininess if the mipmap-level was specified explicitly using the textureCubeLod instruction in the shader; however, this technique is beyond the scope of this tutorial.)
Summary
[edit | edit source]Congratulations, you have reached the end of a rather advanced tutorial! We have seen:
- What image-based rendering is about.
- How to compute and use a cube map to implement a diffuse environment map.
- How to adapt the code for specular reflection.
Further Reading
[edit | edit source]If you still want to know more
- about cube maps, you should read Section “Reflecting Surfaces”.
- about (dynamic) diffuse environment maps, you could read Chapter 10, “Real-Time Computation of Dynamic Irradiance Environment Maps” by Gary King of the book “GPU Gems 2” by Matt Pharr (editor) published 2005 by Addison-Wesley, which is available online.