HydroGeoSphere/Pore Water Freezing and Thawing

To calculate the freezing and thawing of pore water, HydroGeoSphere requires the following set of instructions:

Pore water freezing-thawing...End

grok reads instructions that define the pore water freezing and thawing parameters for the domain until it encounters an End instruction.

• • •

For example:

pore water freezing-thawing
    surface temperature
        0              -7.0
        2592000        -6.1
        5184000        -0.9
        7776000         6.2
        10368000       12.9
        12960000       18.0
        15552000       20.2
        18144000       19.3
        20736000       14.8
        23328000        8.6
        25920000        2.4
        28512000       -4.0
        31104000       -7.0
    end

    thermal diffusivity
    0.2d-6

    background temperature
    6.0d0

    melting temperature
    0.5d0

    freezing temperature
    -0.5d0

    maximum freezing depth
    2.0d0

    integration convergence criteria
    1.0e-4

    memory length for convolution integral
    15552000.0d0     ! 6*30*86400 sec = 6 months

end

Surface temperature

1. time(i), val(i)...end The time and surface temperature value list.

At time time(i) the value val(i) is applied and maintained until time time(i+1). The last value entered in the list will be applied until the end of the simulation.

• • •

Thermal diffusivity

1. val Thermal diffusivity [L² T⁻¹].

• • •

Background temperature

1. val Background temperature [Θ].

• • •

Melting temperature

1. val Melting temperature [Θ].

• • •

Freezing temperature

1. val Freezing temperature [Θ].

• • •

Maximum freezing depth

1. val Maximum freezing depth [L].

• • •

Integration convergence criteria

1. val Integration convergence criteria.

• • •

Memory length for convolution integral

1. val Memory length for convolution integral.

• • •