HydroGeoSphere/Selecting Zones
These instructions can be used to alter the set of chosen zones for the current zone type (i.e. porous media, dual, fracture or surface.)
Clear chosen zones
[edit | edit source]Returns the set to the default state, in which no zones are chosen. This is recommended if you are unsure of which zones are chosen due to previously issued instructions.
- • • •
- • • •
Choose zones all
[edit | edit source]Selects all zones. This is useful if you wish to assign a property to all zones in the grid.
- • • •
- • • •
Choose zone number
[edit | edit source]- num_zone Zone number.
Selects the zone numbered num_zone.
- • • •
- • • •