Inorganic Chemistry/Chemical Bonding/Orbital hybridization

Four sp³ orbitals.

Three sp² orbitals.

In chemistry, hybridisation (or hybridization) is the concept of mixing atomic orbitals into new hybrid orbitals suitable for the pairing of electrons to form chemical bonds in valence bond theory. Hybrid orbitals are very useful in the explanation of molecular geometry and atomic bonding properties.

History and uses

Chemist Linus Pauling first developed hybridisation theory in order to explain the structure of molecules such as methane (CH₄). Pauling pointed out that a carbon atom forms four bonds by using one s and three p orbitals, so that "it might be inferred" that a carbon atom would form three bonds at right angles (using p orbitals) and a fourth weaker bond using the s orbital in some arbitrary direction. In reality however, methane has four bonds of equivalent strength separated by the tetrahedral bond angle of 109.5°. Pauling explained this by supposing that in the presence of four hydrogen atoms, the s and p orbitals form four equivalent combinations or hybrid orbitals, each denoted by sp³ to indicate its composition, which are directed along the four C-H bonds. Historically, this concept was developed for such simple chemical systems but the approach was later applied more widely, and today it is considered an effective heuristic for rationalizing the structures of organic compounds. It gives a simple orbital picture equivalent to Lewis structures. Hybridisation theory finds its use mainly in organic chemistry.

Hybridisation theory is an integral part of organic chemistry. For drawing reaction mechanisms sometimes a classical bonding picture is needed with two atoms sharing two electrons. Hybridisation theory explains bonding in alkenes and methane. The amount of p character or s character, which is decided mainly by orbital hybridisation, can be used to reliably predict molecular properties such as acidity or basicity.

Overview

Orbitals are a model representation of the behavior of electrons within molecules. In the case of simple hybridisation, this approximation is based on atomic orbitals, similar to those obtained for the hydrogen atom, the only atom for which an exact analytic solution to its Schrödinger equation is known. In heavier atoms, like carbon, nitrogen, and oxygen, the atomic orbitals used are the 2s and 2p orbitals, similar to excited state orbitals for hydrogen.

Hybrid orbitals are assumed to be mixtures of atomic orbitals, superimposed on each other in various proportions. For example, in methane, the C hybrid orbital which forms each C-H bond consists of 25% s character and 75% p character and is thus described as sp³ (read as s-p-three) hybridised. Quantum mechanics describes this hybrid as an sp³ wavefunction of the form N[s + (√3)pσ], where N is a normalization constant (here 1/2) and pσ is a p orbital directed along the C-H axis to form a sigma bond. The p-to-s ratio (denoted λ in general) is √3 in this example, and N²λ² = 3/4 is the p character or the weight of the p component.

In general, any two hybrid orbitals on the same atom must be mutually orthogonal. For an atom with s and p orbitals forming hybrids h_i and h_j with included angle $\theta$, the orthogonality condition implies the relation: 1 + $\lambda$_i$\lambda$_j cos($\theta$) = 0. The p-to-s ratio for hybrid i is $\lambda$_i², and for hybrid j it is $\lambda$_j². The bond directed towards a more electronegative substituent tends to have higher p-character as stated in Bent's rule. In the special case of equivalent hybrids on the same atom, again with included angle $\theta$, the equation reduces to just 1 + $\lambda$² cos($\theta$) = 0. For example, BH₃ has a trigonal planar geometry, three 120° bond angles, three equivalent hybrids about the boron atom, and thus 1 + $\lambda$² cos($\theta$) = 0 becomes 1 + $\lambda$² cos(120°) = 0, giving $\lambda$² = 2 for the p-to-s ratio. In other words, sp² hybrids.

Types of hybridisation

sp³

For a tetrahedrally coordinated carbon (e.g., methane CH₄), the carbon should have 4 orbitals with the correct symmetry to bond to the 4 hydrogen atoms.

Carbon's ground state configuration is 1s² 2s² 2p² or more easily read:

C	↑↓	↑↓	↑	↑
	1s	2s	2p	2p	2p

(Note: The 1s orbital is lower in energy than the 2s orbital, and the 2s orbital is lower in energy than the 2p orbitals)

The carbon atom can utilize its two singly occupied p-type orbitals, to form two covalent bonds with two hydrogen atoms, yielding the singlet methylene CH₂, the simplest of the carbenes. The carbon atom can also bond to four hydrogen atoms by an excitation of an electron from the doubly occupied 2s orbital to the empty 2p orbital, so that there are four singly occupied orbitals.

C*	↑↓	↑	↑	↑	↑
	1s	2s	2p	2p	2p

The energy released by formation of two additional bonds more than compensates for the excitation energy required, energetically favouring the formation of four C-H bonds.

Quantum mechanically, the lowest energy is obtained if the four bonds are equivalent, which requires that they be formed from equivalent orbitals on the carbon. A set of four equivalent orbitals can be obtained that are linear combinations of the valence-shell (core orbitals are almost never involved in bonding) s and p wave functions, which are the four sp³ hybrids.

C*	↑↓	↑	↑	↑	↑
	1s	sp3	sp3	sp3	sp3

In CH₄, four sp³ hybrid orbitals are overlapped by hydrogen's 1s orbital, yielding four σ (sigma) bonds (that is, four single covalent bonds) of the same length and strength.

translates into

sp²

Other carbon based compounds and other molecules may be explained in a similar way as methane. For example, ethene (C₂H₄) has a double bond between the carbons. The Lewis structure looks like this:

Ethene Lewis Structure. Each C bonded to two hydrogen atoms and one double bond between them.

For this molecule, carbon sp² hybridises, because one π (pi) bond is required for the double bond between the carbons and only three σ bonds are formed per carbon atom. In sp² hybridisation the 2s orbital is mixed with only two of the three available 2p orbitals:

C*	↑↓	↑	↑	↑	↑
	1s	sp2	sp2	sp2	2p

forming a total of three sp² orbitals and one remaining p orbital. In ethylene the two carbon atoms form a σ bond by overlapping two sp² orbitals and each carbon atom forms two covalent bonds with hydrogen by s–sp² overlap all with 120° angles. The π bond between the carbon atoms perpendicular to the molecular plane is formed by 2p–2p overlap. The hydrogen-carbon bonds are all of equal strength and length, which agrees with experimental data.

sp

The chemical bonding in compounds such as alkynes with triple bonds is explained by sp hybridization. In this model, the 2s orbital mixes with only one of the three p-orbitals,

C*	↑↓	↑	↑	↑	↑
	1s	sp	sp	2p	2p

resulting in two sp orbitals and two remaining p orbitals. The chemical bonding in acetylene (C₂H₂) consists of sp–sp overlap between the two carbon atoms forming a σ bond and two additional π bonds formed by p–p overlap. Each carbon also bonds to hydrogen in a sigma s–sp overlap at 180° angles.

Hybridisation and molecule shape

Hybridisation helps to explain molecule shape, since the angles between bonds are (approximately) equal to the angles between hybrid orbitals.

Shapes of the different types of hybrid orbitals

sp^x hybridisation

As the valence orbitals of main group elements are the one s and three p orbitals with the corresponding octet rule, sp^x hybridisation is used to model the shape of these molecules.

Coordination number	Shape	Hybridisation	Examples
2	Linear	sp hybridisation (180°)	CO2
3	Trigonal planar	sp2 hybridisation (120°)	BCl3
4	Tetrahedral	sp3 hybridisation (109.5°)	CCl4
Interorbital angles	$\theta =\arccos \left(-{\frac {1}{x}}\right)$

sp^xd^y hybridisation

As the valence orbitals of transition metals are the five d, one s and three p orbitals with the corresponding 18-electron rule, sp^xd^y hybridisation is used to model the shape of these molecules. These molecules tend to have multiple shapes corresponding to the same hybridisation due to the different d-orbitals involved. As the p-orbitals are not necessarily fully occupied, the square planar shape has 16 valence electrons.

Coordination number	Shape	Hybridisation	Examples
4	Square planar	sp2d hybridisation	PtCl42−
5	Trigonal bipyramidal	sp3d hybridisation	Fe(CO)5
	Square pyramidal		MnCl52−
6	Octahedral	sp3d2 hybridisation	Mo(CO)6
7	Pentagonal bipyramidal	sp3d3 hybridisation	ZrF73−
	Capped octahedral		MoF7−
	Capped trigonal prismatic		TaF72−
8	Square antiprismatic	sp3d4 hybridisation	ReF8−
	Dodecahedral		Mo(CN)84−
	Bicapped trigonal prismatic		ZrF84−
9	Tricapped trigonal prismatic	sp3d5 hybridisation	ReH92−
	Capped square antiprismatic

sd^x hybridisation

In certain transition metal complexes with a low d electron count, the p-orbitals are unoccupied and sd^x hybridisation is used to model the shape of these molecules.

Coordination number	Shape	Hybridisation	Examples
3	Trigonal pyramidal	sd2 hybridisation (90°)	CrO3
4	Tetrahedral	sd3 hybridisation (70.5°, 109.5°)	TiCl4
5	Square pyramidal	sd4 hybridisation (65.9°, 114.1°)	Ta(CH3)5
6	C3v Trigonal prismatic	sd5 hybridisation (63.4°, 116.6°)	W(CH3)6
Interorbital angles	$\theta =\arccos \left(\pm {\sqrt {{\frac {1}{3}}\left(1-{\frac {2}{x}}\right)}}\right)$

Hybridisation of hypervalent molecules

Octet expansion

In some general chemistry textbooks, hybridisation is presented for main group AX₅ and above using an "expanded octet" scheme with d-orbitals first proposed by Pauling. However, such a scheme is now considered to be incorrect in light of computational chemistry calculations.

Coordination number	Shape	Hybridisation	Examples
5	Trigonal bipyramidal	sp3d hybridisation	PF5
6	Octahedral	sp3d2 hybridisation	SF6
7	Pentagonal bipyramidal	sp3d3 hybridisation	IF7

In 1990, Magnusson published a seminal work definitively excluding the role of d-orbital hybridization in bonding in hypervalent compounds of second-row elements. This had long been a point of contention and confusion in describing these molecules using molecular orbital theory. Part of the confusion here originates from the fact that one must include d-functions in the basis sets used to describe these compounds (or else unreasonably high energies and distorted geometries result), and the contribution of the d-function to the molecular wavefunction is large. These facts were historically interpreted to mean that d-orbitals must be involved in bonding. However, Magnusson concludes in his work that d-orbital involvement is not implicated in hypervalency.

Resonance

In light of computational chemistry, a better treatment would be to invoke sigma bond resonance in addition to hybridisation, which implies that each resonance structure has its own hybridisation scheme. All resonance structures must obey the octet rule.

Coordination number	Resonance structures
5	Trigonal bipyramidal
6	Octahedral
7	Pentagonal bipyramidal

Hybridisation in computational VB theory

While the simple model of orbital hybridisation is commonly used to explain molecular shape, hybridisation is used differently when computed in modern valence bond programs. Specifically, hybridisation is not determined a priori but is instead variationally optimized to find the lowest energy solution and then reported. This means that all artificial constraints, specifically two constraints, on orbital hybridisation are lifted:

• that hybridisation is restricted to integer values (isovalent hybridisation)
• that hybrid orbitals are orthogonal to one another (hybridisation defects)

This means that in practice, hybrid orbitals do not conform to the simple ideas commonly taught and thus in scientific computational papers are simply referred to as sp^x, sp^xd^y or sd^x hybrids to express their nature instead of more specific integer values.

Isovalent hybridisation

Although ideal hybrid orbitals can be useful, in reality most bonds require orbitals of intermediate character, analogous to intermediate ionic-covalent character. This requires an extension to include flexible weightings of atomic orbitals of each type (s, p, d) and allows for a quantitative depiction of bond formation when the molecular geometry deviates from ideal bond angles. The amount of p-character is not restricted to integer values; i.e., hybridisations like sp^2.5 are also readily described.

The hybridisation of bond orbitals is determined by Bent's rule: "Atomic s character concentrates in orbitals directed toward electropositive substituents".

For molecules with lone pairs, the bonding orbitals are isovalent sp^x hybrids. For example, the two bond-forming hybrid orbitals of oxygen in water can be described as sp^4.0 to give the interorbital angle of 104.5°. This means that they have 20% s character and 80% p character and does not imply that a hybrid orbital is formed from one s and four p orbitals on oxygen since the 2p subshell of oxygen only contains three p orbitals.

Hybridization defects

Hybridisation of s and p orbitals to form effective sp^x hybrids requires that they have comparable radial extent. While 2p orbitals are on average less than 10% larger than 2s, in part attributable to the lack of a radial node in 2p orbitals, 3p orbitals which have one radial node, exceed the 3s orbitals by 20–33%. The difference in extent of s and p orbitals increases further down a group. The hybridisation of atoms in chemical bonds can be analysed by considering localised molecular orbitals, for example using natural localised molecular orbitals in a natural bond orbital (NBO) scheme. In methane, CH₄, the calculated p/s ratio is approximately 3 consistent with "ideal" sp³ hybridisation, whereas for silane, SiH₄, the p/s ratio is closer to 2. A similar trend is seen for the other 2p elements. Substitution of fluorine for hydrogen further decreases the p/s ratio. The 2p elements exhibit near ideal hybridisation with orthogonal hybrid orbitals. For heavier p block elements this assumption of orthogonality cannot be justified. These deviations from the ideal hybridisation were termed hybridisation defects by Kutzelnigg.

However, computational VB groups such as Gerratt, Cooper and Raimondi (SCVB) as well as Shaik and Hiberty (VBSCF) go a step further to argue that even for model molecules such as methane, ethylene and acetylene, the hybrid orbitals are already defective and nonorthogonal, with hybridisations such as sp^1.76 instead of sp³ for methane.

Photoelectron spectra

One misconception concerning orbital hybridisation is that it incorrectly predicts the ultraviolet photoelectron spectra of many molecules. While this is true if Koopmans' theorem is applied to localized hybrids, quantum mechanics requires that the (in this case ionized) wavefunction obey the symmetry of the molecule which implies resonance in valence bond theory. For example, in methane, the ionized states (CH₄⁺) can be constructed out of four resonance structures attributing the ejected electron to each of the four sp³ orbitals. A linear combination of these four structures, conserving the number of structures, leads to a triply degenerate T₂ state and a A₁ state. The difference in energy between the ionized state and the ground state would be the ionization energy, which yields two values in agreement with experiment.

Two distinct states for CH₄⁺ exist (A₁ and T₂), both of which result from the ionization of CH₄. This gives rise to the two unique peaks on the photoelectron spectrum of methane.

Localized MOs vs canonical MOs

Bonding orbitals formed from hybrid atomic orbitals may be considered as localized molecular orbitals, which can be formed from the delocalised orbitals of molecular orbital theory by an appropriate mathematical transformation. For molecules in the ground state, this transformation of the orbitals leaves the total many-electron wave function unchanged. The hybrid orbital description of the ground state is therefore equivalent to the delocalised orbital description for ground state total energy and electron density, as well as the molecular geometry that corresponds to the minimum total energy value.

Two localized representations

The symmetry-adapted and hybridized lone pairs of H₂O

Molecules with multiple bonds or multiple lone pairs can have orbitals represented in terms of sigma and pi symmetry or equivalent orbitals. Different valence bond methods use either of the two representations, which have mathematically equivalent total many-electron wave functions and are related by a unitary transformation of the set of occupied molecular orbitals.

For multiple bonds, the sigma-pi representation is the predominant one compared to the equivalent orbital (bent bond) representation. In contrast, for multiple lone pairs, most textbooks use the equivalent orbital representation. However, the sigma-pi representation is also used, such as by Weinhold and Landis within the context of natural bond orbitals, a localized orbital theory containing modernized analogs of classical (valence bond/Lewis structure) bonding pairs and lone pairs. For the hydrogen fluoride molecule, for example, two F lone pairs are essentially unhybridized p orbitals, while the other is an sp^x hydrid orbital. An analogous consideration applies to water (one O lone pair is in a pure p orbital, another is in an sp^x hybrid orbital).