Jump to content

LMIs in Control/pages/H stabilization

From Wikibooks, open books for an open world

-Stabilization

There are a wide variety of control design problems that are addressed in a wide variety of different ways. One of the most important control design problem is that of state feedback stabilization. One such state feedback problem, which will be the main focus of this article, is that of -Stabilization, a form of -Stabilization where the real components are located on the left-half of the complex plane.

The System

[edit | edit source]

For this particular problem, suppose that we were given a linear system in the form of:

where and . Then the LMI for determining the -stabilization case would be obtained as described below.

The Data

[edit | edit source]

In order to obtain the LMI, we need the following 2 matrices: .

The Optimization Problem

[edit | edit source]

Suppose - for the linear system given above - we were asked to design a state-feedback control law where such that the closed-loop system:

is stable, then the system would be stabilized as follows.

The LMI: -Stabilization

[edit | edit source]

From the given pieces of information, it is clear that the optimization problem only has a solution if there exists a matrix and a symmetric matrix that satisfy the following:

Conclusion:

[edit | edit source]

Given the resulting controller matrix , it can be observed that the matrix is -stable.

Implementation

[edit | edit source]
  • Example Code - A GitHub link that contains code (titled "HStability.m") that demonstrates how this LMI can be implemented using MATLAB-YALMIP.
[edit | edit source]
  • D stabilization - Equivalent LMI for -stabilization.
[edit | edit source]

A list of references documenting and validating the LMI.


Return to Main Page:

[edit | edit source]