LPI Linux Certification/Using Email Servers
Detailed Objectives (211.1)
[edit | edit source](LPIC-2 Version 4.5)
Weight: 4
Description: Candidates should be able to manage an email server, including the configuration of e-mail aliases, e-mail quotas and virtual e-mail domains. This objective includes configuring internal e-mail relays and monitoring e-mail servers.
Key Knowledge Areas:
- Configuration files for postfix.
- Basic TLS configuration for postfix
- Basic knowledge of the SMTP protocol
- Awareness of sendmail and exim
Terms and Utilities:
- Configuration files and commands for postfix
/etc/postfix//var/spool/postfix/- sendmail emulation layer commands
/etc/aliases- mail-related logs in
/var/log/
Using Sendmail
[edit | edit source]Exercises
[edit | edit source]Using Postfix
[edit | edit source]Postfix is written and maintained by Wietse Venema who has also written tcp_wrappers, and Satan. Postfix began its life as VMailer but Wietse has released the software under the IBM GPL and IBM's lawyers discovered that VMailer was too similar to an existing trade mark so the name had to be changed. Postfix is written as a drop in replacement for sendmail and it comes very close to hitting the mark on this. There are a few ?gotchas? which can bite you but they are not serious. Wietse actively supports Postfix through the postfix-users mailing list and there is also a developers mailing list. You can subscribe to the postfix-users mailing list this way:
echo subscribe postfix-users | mail majordomo@postfix.org.
You can subscribe to the developers list in this way:
echo subscribe postfix-testers | mail majordomo@postfix.org.
One last list we should mention is the announce list. You can join the announce list in this way: echo subscribe postfix-announce | mail majordomo@postfix.org. Postfix development is on-going and these mailing lists are quite active as of this writing. Archives for the mailing lists may be found at: http://www.egroups.com/group/postfix-users/ and at: http://msgs.SecurePoint.com/postfix/.
When a message enters the Postfix mail system, the first stop on the inside is the incoming queue. The figure below shows the main components that are involved with new mail.
The figure shows the main Postfix system components, and the main information flows between them. Yellow ellipsoids are mail programs, Yellow boxes are mail queues or files. Blue boxes are lookup tables.
Programs in the large box run under control by the Postfix resident master daemon. Data in the large box is property of the Postfix mail system.
Mail is posted locally. The Postfix sendmail program invokes the privileged postdrop program which deposits the message into the maildrop directory, where the message is picked up by the pickup daemon. This daemon does some sanity checks, in order to protect the rest of the Postfix system.
Mail comes in via the network. The Postfix SMTP server receives the message and does some sanity checks, in order to protect the rest of the Postfix system. The SMTP server can be configured to implement UCE controls on the basis of local or network-based black lists, DNS lookups, and other client request information. Mail is generated internally by the Postfix system itself, in order to return undeliverable mail to the sender. The bounce or defer daemon brings the bad news.
Mail is forwarded by the local delivery agent, either via an entry in the system-wide alias database, or via an entry in a per-user .forward file. This is indicated with the unlabeled arrow.
Mail is generated internally by the Postfix system itself, in order to notify the postmaster of a problem (this path is also indicated with the unlabeled arrow). The Postfix system can be configured to notify the postmaster of SMTP protocol problems, UCE policy violations, and so on.
The cleanup daemon implements the final processing stage for new mail. It adds missing From: and other message headers, arranges for address rewriting to the standard user@fully.qualified.domain form, and optionally extracts recipient addresses from message headers. The cleanup daemon inserts the result as a single queue file into the incoming queue, and notifies the queue manager of the arrival of new mail. The cleanup daemon can be configured to transform addresses on the basis of canonical and virtual table lookups.
On request by the cleanup daemon, the trivial-rewrite daemon rewrites addresses to the standard user@fully.qualified.domain form. The initial Postfix version does not implement a rewriting language. Implementing one would take a lot of effort, and most sites do not need it. Instead, Postfix makes extensive use of table lookup.
The primary configuration file for Postfix (the working equivalent to /etc/sendmail.cf) is main.cf. The install.cf file contains the initial settings for Postfix which were set up during the RPM installation. The file master.cf is Postfix' master process configuration file. Each line in the master file describes how a mailer component program should be run. In the debugging section we will talk some more about this file. The postfix-script is a wrapper used by Postfix to execute Postfix commands safely for the Linux environment. Let's take a closer look at the install.cf file as this file contains some data which we will need when we start to configure Postfix with main.cf.
The install.cf file is really just a list of the default settings used by the installation program built into the RPM.
Here is the main.cf file with comments by Wietse Venema and our suggested changes interspersed throughout :
# Global Postfix configuration file. This file lists only a subset
# of all 100+ parameters. See the sample-xxx.cf files for a full list.
#
# The sample files mentioned above are located in /usr/doc/postfix-19990906_pl06/
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix
This is the same directory that sendmail uses for the incoming mail queue.
# The program_directory parameter specifies the default location of # Postfix support programs and daemons. This setting can be overruled # with the command_directory and daemon_directory parameters. # program_directory = /some/where/postfix/bin
The line above must be corrected. The RPM installs the Postfix binaries into /usr/libexec/postfix by default.
# The command_directory parameter specifies the location of all # postXXX commands. The default value is $program_directory. # command_directory = /usr/sbin
The line above is correct and may be left as is.
# The daemon_directory parameter specifies the location of all Postfix # daemon programs (i.e. programs listed in the master.cf file). The # default value is $program_directory. This directory must be owned # by root. # daemon_directory = /usr/libexec/postfix
The line above is correct and may be left as is.
# QUEUE AND PROCESS OWNERSHIP # # The mail_owner parameter specifies the owner of the Postfix queue # and of most Postfix daemon processes. Specify the name of a user # account THAT DOES NOT SHARE A GROUP WITH OTHER ACCOUNTS AND THAT # OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In particular, # don't specify nobody or daemon. PLEASE USE A DEDICATED USER. # mail_owner = postfix
The line above is correct and may be left as is.
# The default_privs parameter specifies the default rights used by # the local delivery agent for delivery to external file or command. # These rights are used in the absence of a recipient user context. # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. # #default_privs = nobody
The line above is correct and may be left as is but it should be uncommented (e.g. Remove the leading pound sign).
# INTERNET HOST AND DOMAIN NAMES # # The myhostname parameter specifies the Internet hostname of this # mail system. The default is to use the fully-qualified domain name # from gethostname(). $myhostname is used as a default value for many # other configuration parameters. # #myhostname = host.domain.name
Set the value in the line above to the Fully Qualified Domain Name (FQDN) for you machine. E.g. if your hostname is turkey and your domain is trot.com then your FQDN would be ?turkey.trot.com?. You will also need to uncomment this line.
#myhostname = virtual.domain.name
The line above is redundant for most configurations and can usually be left commented.
# The mydomain parameter specifies the local Internet domain name. # The default is to use $myhostname minus the first component. # $mydomain is used as a default value for many other configuration # parameters. # #mydomain = domain.name
The line above should be your domain name only without the hostname prepended to the front of it. As in the example we gave above the correct value here would be trot.com. Don't forget to uncomment the line as well.
# SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted # mail appears to come from. The default is to append $myhostname, # which is fine for small sites. If you run a domain with multiple # machines, you should (1) change this to $mydomain and (2) set up # a domain-wide alias database that aliases each user to # user@that.users.mailhost. # #myorigin = $myhostname #myorigin = $mydomain
The instructions here are pretty good. Typically what's done here is to let this default to $mydomain. Be sure to uncomment your choice.
# RECEIVING MAIL # The inet_interfaces parameter specifies the network interface # addresses that this mail system receives mail on. By default, # the software claims all active interfaces on the machine. The # parameter also controls delivery of mail to user@[ip.address]. # #inet_interfaces = all
Once again the instructions here are good. Just uncomment the above listed line and you should be fine. Unless you have some odd requirement the next two entries can be left commented. You shouldn't need them.
#inet_interfaces = $myhostname #inet_interfaces = $myhostname, localhost # The mydestination parameter specifies the list of domains that this # machine considers itself the final destination for. # The default is $myhostname + localhost.$mydomain. On a mail domain # gateway, you should also include $mydomain. Do not specify the # names of domains that this machine is backup MX host for. Specify # those names via the relay_domains or permit_mx_backup settings for # the SMTP server (see sample-smtpd.cf. # The local machine is always the final destination for mail addressed # to user@[the.net.work.address] of an interface that the mail system # receives mail on (see the inet_interfaces parameter). # Specify a list of host or domain names, /file/name or type:table # patterns, separated by commas and/or whitespace. A /file/name # pattern is replaced by its contents; a type:table is matched when # a name matches a lookup key. Continue long lines by starting the # next line with whitespace. # #mydestination = $myhostname, localhost.$mydomain #mydestination = $myhostname, localhost.$mydomain $mydomain
The most common practice is to select the line immediately above as your choice here. Be sure to uncomment it and put a comma between the last two entries as it appears to have been omitted.
#mydestination = $myhostname, localhost.$mydomain, $mydomain, # mail.$mydomain, www.$mydomain, ftp.$mydomain # INTERNET VERSUS INTRANET # The relayhost parameter specifies the default host to send mail to # when no entry is matched in the optional transport(5) table. When # no relayhost is given, mail is routed directly to the destination. # # On an intranet, specify the organizational domain name. If your # internal DNS uses no MX records, specify the name of the intranet # gateway host instead. # # Specify a domain, host, host:port, [address] or [address:port]. # Use the form [destination] to turn off MX lookups. See also the # default_transport parameter if you're connected via UUCP. # #relayhost = $mydomain #relayhost = gateway.my.domain #relayhost = uucphost #relayhost = [mail.$mydomain:9999]
If you are behind some sort of a firewall or you need to masquerade the envelope (which will be covered later in this document) you would set the ?relayhost? value to the MTA for your domain. If this host is to be *the* MTA for the domain then leave all of these commented out.
# DEFAULT TRANSPORT # # The default_transport parameter specifies the default message # delivery transport to use when no transport is explicitly given in # the optional transport(5) table. # #default_transport = smtp
In most cases the above line would be uncommented and left as is.
#default_transport = uucp # ADDRESS REWRITING # # Insert text from sample-rewrite.cf if you need to do address # masquerading. # # Insert text from sample-canonical.cf if you need to do address # rewriting, or if you need username->Firstname.Lastname mapping. # ADDRESS REDIRECTION (VIRTUAL DOMAIN) # # Insert text from sample-virtual.cf if you need virtual domain support. # "USER HAS MOVED" BOUNCE MESSAGES # # Insert text from sample-relocated.cf if you need "user has moved" # style bounce messages. Alternatively, you can bounce recipients # with an SMTP server access table. See sample-smtpd.cf. # TRANSPORT MAP # # Insert text from sample-transport.cf if you need explicit routing. # ALIAS DATABASE # # The alias_maps parameter specifies the list of alias databases used # by the local delivery agent. The default list is system dependent. # On systems with NIS, the default is to search the local alias # database, then the NIS alias database. See aliases(5) for syntax # details. # # If you change the alias database, run "postalias /etc/aliases" (or # wherever your system stores the mail alias file), or simply run # "newaliases" to build the necessary DBM or DB file. # # It will take a minute or so before changes become visible. Use # "postfix reload" to eliminate the delay. # #alias_maps = dbm:/etc/aliases alias_maps = hash:/etc/aliases
The alias_maps line is pointing at the /etc/aliases file which we preserved prior to removing sendmail. Best practice (recommended) usually prefers that all the Postfix config files be kept together so it might be a good idea to change this line to read:
alias_maps = hash:/etc/postfix/aliases
and also make sure that you put the aliases file in /etc/postfix. Otherwise Postfix will complain on startup and fail to run. The default db type on Red Hat Linux is hash so be sure and use it as we have here. One common error which people have is when they use dbm instead of hash. Don't fall into that trap.
#alias_maps = hash:/etc/aliases, nis:mail.aliases #alias_maps = netinfo:/aliases # The alias_database parameter specifies the alias database(s) that # are built with "newaliases" or "sendmail -bi". This is a separate # configuration parameter, because alias_maps (see above) may specify # tables that are not necessarily all under control by Postfix. # #alias_database = dbm:/etc/aliases #alias_database = dbm:/etc/mail/aliases #alias_database = hash:/etc/aliases
As the instructions say if you want to use the newaliases command to handle the aliases file (recommended) you should uncomment the above line but be sure (if you made the path change we recommended in the alias_maps section) and change it to read:
alias_database = hash:/etc/postfix/aliases
Then be sure to uncomment the line and run the newaliases command before starting Postfix.
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
If you happen to run majordomo then you should use the line above instead of just the aliases line. Be sure the path to the file majordomo is correct. The best practice convention is to put it into /etc/postfix. Most Red Hat Linux sendmail installations would have had it in /etc/mail/. We will discuss this a bit more when we get to the listserv section of this document.
# DELIVERED-TO # # The prepend_delivered_header controls when Postfix should prepend # a Delivered-To: message header. # # By default, Postfix prepends a Delivered-To: header when forwarding # mail and when delivering to file (mailbox) or command. Turning off # the Delivered-To: header when forwarding mail is not recommended. # # prepend_delivered_header = command, file, forward # prepend_delivered_header = forward
The defaults will work fine so you can leave this section commented out unless you have some special need or preference.
# ADDRESS EXTENSIONS (e.g., user+foo) # # The recipient_delimiter parameter specifies the separator between # user names and address extensions (user+foo). See canonical(5), # local(8), relocated(5) and virtual(5) for the effects this has on # aliases, canonical, virtual, relocated and .forward file lookups. # Basically, the software tries user+foo and .forward+foo before # trying user and .forward. # # recipient_delimiter = +
This one can be left commented out also, unless you have some special need or preference.
# DELIVERY TO MAILBOX # # The home_mailbox parameter specifies the optional pathname of a # mailbox relative to a user's home directory. The default is to # deliver to the UNIX-style /var/spool/mail/user or /var/mail/user. # Specify "Maildir/" for qmail-style delivery (the / is required). # #home_mailbox = Mailbox #home_mailbox = Maildir/
On Red Hat Linux systems you should leave this alone unless you know what you're doing. If you're converting from qmail to Postfix (doubtful) then it would probably be useful.
# The mail_spool_directory parameter specifies the directory where # UNIX-style mailboxes are kept. The default setting depends on the # system type. # # mail_spool_directory = /var/mail # mail_spool_directory = /var/spool/mail
The previous line is correct for Red Hat Linux defaults so it should be uncommented and left as is.
# The mailbox_command parameter specifies the optional external # command to use instead of mailbox delivery. The command is run as # the recipient with proper HOME, SHELL and LOGNAME environment settings. # Exception: delivery for root is done as $default_user. # # Other environment variables of interest: USER (recipient username), # EXTENSION (address extension), DOMAIN (domain part of address), # and LOCAL (the address localpart). # # Unlike other Postfix configuration parameters, the mailbox_command # parameter is not subjected to $parameter substitutions. This is to # make it easier to specify shell syntax (see example below). # # Avoid shell meta characters because they will force Postfix to run # an expensive shell process. Procmail alone is expensive enough. # #mailbox_command = /some/where/procmail
The default MDA on Red Hat Linux systems is procmail. You can use the command ?which procmail? to verify the path but unless you've changed procmail's location it is located in ?/usr/bin/procmail?. Don't forget to uncomment the line.
#mailbox_command = /some/where/procmail -a "$EXTENSION" # The mailbox_transport specifies the optional transport in master.cf # to use after processing aliases and .forward files. This parameter # has precedence over the mailbox_command, fallback_transport and # luser_relay parameters. # #mailbox_transport = cyrus
On a default Red Hat Linux system you should leave the above line alone.
# The fallback_transport specifies the optional transport in master.cf # to use for recipients that are not found in the UNIX passwd database. # This parameter has precedence over the luser_relay parameter. # #fallback_transport =
On a default Red Hat Linux system you should leave the above line alone.
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown local recipients
# is bounced.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay = $user@other.host
# luser_relay = $local@other.host
# luser_relay = admin+$local
It's your choice what you do here but it can be quite annoying to receive a bazillion bounces a day. Leave this alone (recommended).
# JUNK MAIL CONTROLS # # The controls listed here are only a very small subset. See the file # sample-smtpd.cf for an elaborate list of anti-UCE controls. # The header_checks parameter restricts what may appear in message # headers. This requires that POSIX or PCRE regular expression support # is built-in. Specify "/^header-name: stuff you do not want/ REJECT" # in the pattern file. Patterns are case-insensitive by default. Note: # specify only patterns ending in REJECT. Patterns ending in OK are # mostly a waste of cycles. # #header_checks = regexp:/etc/postfix/filename #header_checks = pcre:/etc/postfix/filename
The above section enables a filter which you can use to detect and ?bounce? mail which matches a certain regular expression (REGEXP). The difference between using procmail and regexp or PCRE is that these two catch the mail prior to delivery and can effectively block unwanted mail at the SMTP port.
# The relay_domains parameter restricts what domains (and subdomains # thereof) this mail system will relay mail from or to. See the # smtpd_recipient_restrictions restriction in the file sample-smtpd.cf. # # By default, Postfix relays mail only from or to sites in or below # $mydestination, or in the optional virtual domain list. # # Specify a list of hosts or domains, /file/name patterns or type:name # lookup tables, separated by commas and/or whitespace. Continue # long lines by starting the next line with whitespace. A file name # is replaced by its contents; a type:name table is matched when a # (parent) domain appears as lookup key. # # NOTE: Postfix will not automatically forward mail for domains that # list this system as their primary or backup MX host. See the # permit_mx_backup restriction in the file sample-smtpd.cf. # #relay_domains = $mydestination, $virtual_maps
For anyone who knows already how MX records work this is a critical component in the Postfix configuration. Home users probably won't need this line but anyone who handles mail for mutiple domains will.
Here's a sample of how it can be used:
relay_domains = $mydestination, /etc/postfix/relay-domains
In this example the domains you want to relay for would be placed in the file /etc/postfix/relay-domains. One to a line like so:
here.com mail.here.com there.org mail.there.org
Note: this file is *not* hashed or mapped. It is a simple text file. You can also use IP addresses instead of names.
# The mynetworks parameter specifies the list of networks that are # local to this machine. The list is used by the anti-UCE software # to distinguish local clients from strangers. See permit_mynetworks # and smtpd_recipient_restrictions in the file sample-smtpd.cf file. # # The default is a list of all networks attached to the machine: a # complete class A network (X.0.0.0/8), a complete class B network # (X.X.0.0/16), and so on. If you want stricter control, specify a # list of network/mask patterns, where the mask specifies the number # of bits in the network part of a host address. You can also specify # the absolute pathname of a pattern file instead of listing the # patterns here. # #mynetworks = 168.100.189.0/28, 127.0.0.0/8
The line above is another critical component in the configuration of Postfix. As the instructions say it specifies the list of networks that are local to this host. For those unfamiliar with the syntax used, it's called Classless Inter-Domain Routing (CIDR) or supernetting. For those familiar with the network classes (A, B, C etc.) it is a way of dividing IP addresses up without reference to class.
#mynetworks = $config_directory/mynetworks # SHOW SOFTWARE VERSION OR NOT # # The smtpd_banner parameter specifies the text that follows the 220 # status code in the SMTP greeting banner. Some people like to see # the mail version advertised. By default, Postfix shows no version. # # You MUST specify the $myhostname at the start of the text. When # the SMTP client sees its own hostname at the start of an SMTP # greeting banner it will report a mailer loop. That's better than # having a machine meltdown. # #smtpd_banner = $myhostname ESMTP $mail_name #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
The above config entry is a matter of personal preference. It is not required and is up to the administrator to choose.
# PARALLEL DELIVERY TO THE SAME DESTINATION # # How many parallel deliveries to the same user or domain? With local # delivery, it does not make sense to do massively parallel delivery # to the same user, because mailbox updates must happen sequentially, # and expensive pipelines in .forward files can cause disasters when # too many are run at the same time. With SMTP deliveries, 10 # simultaneous connections to the same domain could be sufficient to # raise eyebrows. # # Each message delivery transport has its XXX_destination_concurrency_limit # parameter. The default is $default_destination_concurrency_limit. local_destination_concurrency_limit = 2 default_destination_concurrency_limit = 10
As the text above says this section is really about rate limiting. It is, essentially, the gas pedal for Postfix. Unless you have some really good reason to change these the defaults should be fine. Once you've run Postfix for a while (particularly those who use it in a professional setting) you may have a better idea of how this should be set for your environment.
# DEBUGGING CONTROL # # The debug_peer_level parameter specifies the increment in verbose # logging level when an SMTP client or server host name or address # matches a pattern in the debug_peer_list parameter. # debug_peer_level = 2
We recommend the default here unless there is some overriding reason to change this. Debugging will be covered in a later chapter of this document. For what it's worth this section has no real relevance unless the next is enabled.
# The debug_peer_list parameter specifies an optional list of domain # or network patterns, /file/name patterns or type:name tables. When # an SMTP client or server host name or address matches a pattern, # increase the verbose logging level by the amount specified in the # debug_peer_level parameter. # # debug_peer_list = 127.0.0.1 # debug_peer_list = some.domain
This section is used in combination with debug_peer_level so if that's not enabled then this one is moot. This is actually a very neat feature of Postfix. Think about it for a minut. If everything works fine but there is this one host which seems to have problem receiving or sending mail to or from your host then you could use this feature to increase the logging level for just that host.
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
PATH=/usr/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
Leave this section alone for now. We will cover debugging in some detail in a later section of this document. That's it. We've made it through the main.cf file and we're almost ready to start it up.
master.cf
[edit | edit source]The master daemon is a supervisory application which controls and monitors all of the other Postfix processes. The master.cf file is the master daemon's configuration file. The master.cf file is the throttle for Postfix. Here you set all of the daemon process count limits. A good example of a useful limit would be to set a limit on the number of SMTP processes which can be executed simultaneously, after all, you might not want to receive 50 messages inbound all at the same time. The key thing to understand here is that any process without an express limit defaults to a 50 process limit.
In general terms the master.cf file is fine with the defaults as they are so you can leave it alone.
aliases
[edit | edit source]This is simply the default aliases file and it could be exactly the same one you used with sendmail (recommended) and it works the same way it always has with the newaliases command. If you use majordomo your majordomo aliases will work the same way they always have and they will work with the newaliases command as well.
Control of the postfix server is done through the init.d scripts Don't forget to issue a postfix reload command after changing the configuration ! If you modify the aliases database (/etc/aliases), don't forget to activate the changes by issueing a newaliases command (as with sendmail)
Key terms, files and utilities : /etc/aliases /etc/postfix/main.cf /etc/postfix/master.cf /var/spool/postfix
Exercises
[edit | edit source]