Linux Networking/IP Accounting (for Linux-2.0)
IP Accounting (for Linux-2.0)
[edit | edit source]The IP accounting features of the Linux kernel allow you to collect and analyze some network usage data. The data collected comprises the number of packets and the number of bytes accumulated since the figures were last reset. You may specify a variety of rules to categorize the figures to suit whatever purpose you may have. This option has been removed in kernel 2.1.102, because the old ipfwadm- based firewalling was replaced by ``ipfwchains.
Kernel Compile Options:
Networking options --->
[*] IP: accounting
After you have compiled and installed the kernel you need to use the ipfwadm command to configure IP accounting. There are many different ways of breaking down the accounting information that you might choose. I've picked a simple example of what might be useful to use, you should read the ipfwadm man page for more information. Scenario: You have an ethernet network that is linked to the internet via a PPP link. On the ethernet you have a machine that offers a number of services and that you are interested in knowing how much traffic is generated by each of ftp and World Wide Web traffic, as well as total tcp and udp traffic.
You might use a command set that looks like the following, which is shown as a shell script:
#!/bin/sh
#
# Flush the accounting rules
ipfwadm -A -f
#
# Set shortcuts
localnet=44.136.8.96/29
any=0/0
# Add rules for local ethernet segment
ipfwadm -A in -a -P tcp -D $localnet ftp-data
ipfwadm -A out -a -P tcp -S $localnet ftp-data
ipfwadm -A in -a -P tcp -D $localnet www
ipfwadm -A out -a -P tcp -S $localnet www
ipfwadm -A in -a -P tcp -D $localnet
ipfwadm -A out -a -P tcp -S $localnet
ipfwadm -A in -a -P udp -D $localnet
ipfwadm -A out -a -P udp -S $localnet
#
# Rules for default
ipfwadm -A in -a -P tcp -D $any ftp-data
ipfwadm -A out -a -P tcp -S $any ftp-data
ipfwadm -A in -a -P tcp -D $any www
ipfwadm -A out -a -P tcp -S $any www
ipfwadm -A in -a -P tcp -D $any
ipfwadm -A out -a -P tcp -S $any
ipfwadm -A in -a -P udp -D $any
ipfwadm -A out -a -P udp -S $any
#
# List the rules
ipfwadm -A -l -n
#
The names ``ftp-data and ``www refer to lines in /etc/services. The last command lists each of the Accounting rules and displays the collected totals.
An important point to note when analyzing IP accounting is that totals for all rules that match will be incremented so that to obtain differential figures you need to perform appropriate maths. For example, if I wanted to know how much data was not ftp nor www I would substract the individual totals from the rule that matches all ports.
root# ipfwadm -A -l -n IP accounting rules pkts bytes dir prot source destination ports 0 0 in tcp 0.0.0.0/0 44.136.8.96/29 * -> 20 0 0 out tcp 44.136.8.96/29 0.0.0.0/0 20 -> * 10 1166 in tcp 0.0.0.0/0 44.136.8.96/29 * -> 80 10 572 out tcp 44.136.8.96/29 0.0.0.0/0 80 -> * 252 10943 in tcp 0.0.0.0/0 44.136.8.96/29 * -> * 231 18831 out tcp 44.136.8.96/29 0.0.0.0/0 * -> * 0 0 in udp 0.0.0.0/0 44.136.8.96/29 * -> * 0 0 out udp 44.136.8.96/29 0.0.0.0/0 * -> * 0 0 in tcp 0.0.0.0/0 0.0.0.0/0 * -> 20 0 0 out tcp 0.0.0.0/0 0.0.0.0/0 20 -> * 10 1166 in tcp 0.0.0.0/0 0.0.0.0/0 * -> 80 10 572 out tcp 0.0.0.0/0 0.0.0.0/0 80 -> * 253 10983 in tcp 0.0.0.0/0 0.0.0.0/0 * -> * 231 18831 out tcp 0.0.0.0/0 0.0.0.0/0 * -> * 0 0 in udp 0.0.0.0/0 0.0.0.0/0 * -> * 0 0 out udp 0.0.0.0/0 0.0.0.0/0 * -> *