Jump to content

Linux Networking/Serial NULL Modem cable

Add links
From Wikibooks, open books for an open world
< Linux Networking
This page may need to be reviewed for quality.

Serial NULL Modem cable

[edit | edit source]

Not all NULL modem cables are alike. Many null modem cables do little more than trick your computer into thinking all the appropriate signals are present and swap transmit and receive data. This is ok but means that you must use software flow control (XON/XOFF) which is less efficient than hardware flow control. The following cable provides the best possible signalling between machines and allows you to use hardware (RTS/CTS) flow control. 

   Pin Name Pin                Pin
   Tx Data  2 ----------------------------- 3
   Rx Data  3 ----------------------------- 2
   RTS    4 ----------------------------- 5
   CTS    5 ----------------------------- 4
   Ground   7 ----------------------------- 7
   DTR    20 -\--------------------------- 8
   DSR    6 -/
   RLSD/DCD  8 ---------------------------/- 20
                       \- 6
Retrieved from "https://en.wikibooks.org/wiki/Linux_Networking/Serial_NULL_Modem_cable"