Objective 5.3: Hardware Tools
Jump to navigation
Jump to search
Cable tester 
Signal transmitted and reflected from a discontinuity 
Optical Time-domain Reflectometer 
Multimeter 
Toner probe 
Punch down tool 
Cable stripper 
Snips 
Oscilloscope 
Temperature monitor 
Objective 5.3: Given a scenario, utilize the appropriate hardware tools
these are used to check the quality of the cable, how many wires that fully connected, a light will indicate how many wires are working
This is used to check the connectivity of a fibre optic cable and the quality of the connection, by sending timed signals.
It is used to connect the network cables to a RJ-45 network connector. It punches down the cable to ensure a connection and then cuts off the excess wires.
Snips
[edit | edit source].jpg)
