People's Tactics/Interface

Menu bar

There are three menus in the menu bar: File, Info and Preferences and Editing. The Editing menu will only be displayed if the option is ticked under the Info and Preferences menu and, only being relevant to scenario creation, will not be discussed in this section.

File

Load - This command will open the file browser in which you may select the scenario or save file you wish to open. By default, these files are located in the scenario folder. If you already have a scenario loaded, you will have to exit that before you may load a new one. To begin playing a scenario that you have loaded, select the 'start' command from the menu.

Save - Selecting this command will save the current state of the scenario. If you were in the middle of the game, this will save your progress, if you were in edit mode, it will save the state as a new scenario.

Start - This option is only available when a scenario is loaded. Selecting start will bring you to the Start Game Window (more about this below) in which you'll be able to configure a number of options and begin playing People's Tactics.

Random Game - This option will bring up a window that will allow you to configure a game on a random map.

Surrender - This command surrenders your regime. When playing against humans (as in a PBEM game), it is much more polite to surrender first rather than to just stop playing. If it is a PBEM game you are playing, you should email the save file after surrendering.

Exit Game - This option is only available once you have started playing a scenario, selecting it will clear all memory and take you back to editing mode. This is the de facto "quit" command.

Info and Preferences

Show/Hide Grid - This option will put black lines between the hexes on the map, making it easier to see exactly where everything is, although making the map less aesthetically pleasing.

Show Most Recent Enemy Actions -

Sight Range - This option shades the hexes you cannot see, helping you work out where best to explore.

Show supply - This option displays a number above each formation/THQ showing the amount of supply it consumed last turn. The color of the number indicates the quality of supply to the unit. Red indicates poor quality, whilst green indicates good quality.

Show Status Report - This option opens the status report window, which has lots of useful information on the hex, your units and your supply and production.

Show Editing Menu - This option makes the editing menu available, making scenario creation possible.

Start Game Window

Here you can configure a new game. You can set the following options:

Play By Email - Enables you to save the game before starting your opponent’s turn. You will have to manually email the file, however.

Use Passwords – You must select a password before you first turn. On every one of your following turns, you won’t be allowed to play without once again entering it.

Fog of War - If this option is turned off, you will be allowed to see your enemies units and statistics. For a realistic game, always have this option enabled.

Fog of Exploration - If you turn this on, all unseen territory will remain black and shrouded. This is advised for playing random scenarios as it adds some extra difficulty.

AI gets production bonus – Experienced players can use this option to add some additional difficulty to their games by giving the AI regimes a production bonus.

AI or Human? - If you don’t enable human, the computer AI will play the regime in question.

The Map

People's Tactics map image

Units are displayed on the map as icons, the colour of which is unique to the regime. The little colored square on the top left corner is a visual indicator of the Chain of Command, starting at the THQ level (i.e. each THQ has a unique color code). There is no coloured square for SHQs or for units that are not assigned to a THQ

Unit type

The symbol in the middle of the unit icon represents what type of unit it is: air formation, sea formation, artillery, infantry, motorized, armour, THQ or SHQ. THQs are represented by a cross.

Whether a unit is artillery, infantry, motorized or armour depends on the respective ratios: Artillery, if the total Artillery Attack Value (Ranged, not Front, Artillery Unit Type)is higher than the sum of the Soft and Hard Attack and Defence values of Armour or Infantry (whichever is highest), and the formation does not have enough carrying capacity for it to become Motorized; Infantry, if the sum of the Infantry’s Soft and Hard Attack and Defence values is higher than the Armour’s, and the formation does not have enough carrying capacity for it to become Motorized; Motorized, if there is enough carrying capacity to offset the total weight of Infantry and Artillery (Ranged OR Front Artillery Unit Types); Armour, if the sum of the Armour’s Soft and Hard Attack and Defence values is higher than the Infantry’s, and the formation has enough carrying capacity for it to become Motorized.

Values

These values depend on whether it is a land, sea or air formation . Respectively, they represent Attack/Defence, Combat/Cargo, or Dogfight/Interdict. If Fog of War is enabled, other regime’s icon values represent the average of the fore-mentioned numbers, with a random variation thrown in: the number may be anywhere from 80 to 120% of the actual value.

The Unit Information Panel

People's Tactics unit panel image

Name - The unit’s name. The important thing here is that the player may change the name, by clicking on it. Within a maximum of 20 characters, there is very little in the way of limitations on the characters the player may use (the one that comes to mind is that a name cannot start with “).

Parent organisation - In the case of a Formation, the THQ. In the case of a THQ, the SHQ. In the case of a SHQ, the Regime.

People's Tactics readiness icon image Readiness - The current readiness of the unit. Readiness can go from 10 to 100, and starts at 50 for new units. This is an average of the readiness of the Unit Type items that have combat value. If you transfer items from another unit (the SHQ, for instance), it will probably change. A unit gains readiness by sitting still, and loses readiness by moving, attacking or being attacked. If a unit is not being supplied, it will lose readiness even by sitting still.

People's Tactics experience icon image Experience - The current experience of the unit. Experience can go from 25 to 150 points, and starts at 25 for new units. This is an average of the experience of the Unit Type items that have combat value. If items are transferred from another unit (the SHQ, for instance), it will probably change (and even if you don’t believe in Murphy’s Law, the change will most likely be for worse rather than for better). A unit gains experience automatically up to 50 experience points (6 points each turn, which means that a unit at 49 XPs may be at 55 XPs next turn), or by winning or losing a combat (as in most things in life, winning is best).

People's Tactics movement points icon image Movement Points - The current Movement Points (MP) available to the unit.

People's Tactics movement type icon image Movement Type Used - In the SHQ panel, this represents the carrying capacity available to that SHQ. For other units, Movement type may be Artillery, Infantry, Motorized or Armour (for land formations), Air (for air formations) or Sea (for sea formations). In the case of land formation, the percentage behind it denotes the percentage of mechanization of the unit. 100% denotes that it will move at the speed of a mechanized unit (trucks, tanks, etc...).

People's Tactics weight icon image Weight, or in case of a naval unit, the amount of weight it can carry

People's Tactics supply icon image Percentage of supplies received out of what is required (in the SHQ panel, this indicates the number of supply points in stock)

People's Tactics fame icon image The fame of the Commanding officer

People's Tactics retreat icon image Percentage of Retreat. The higher the number, the sooner the officer will retreat his unit from combat

People's Tactics skills icons image The ground, naval and air skills of the commanding officer

TOE Panel

TOE is a military acronym standing for Table of Organization and Equipment. The TOE panel is the bottom middle part of the game screen. If a SHQ is selected, it shows the inventory of Unit Type items of that SHQ. If another class of unit is selected, it shows what Unit Types are part of that unit, and how many of each.

When a land formation or a THQ are selected, some additional information (over the Unit Type graphic) is shown: in the top right corner, in red, the percentage of each Unit Type items that will take part in the first round of combat; in the top left corner of an Infantry class, in yellow, the percentage of Infantry items that take part in the first round of combat and that are protected by Armour items (i.e., if Armour and Infantry are present in the same combat formation, a part of the infantry will take losses only after all armour in that formation is destroyed); in the bottom row of an Artillery class, in light blue, wether the Artillery type is a front line item, or a ranged artillery item; if this last, the maximum range in hexes that can be fired at.

The Terrain Panel

All info on selected hex is given in this window

People's Tactics terrain panel detail image

The first percentage denotes the amount of supply this hex receives from the best SHQ. The x,y coordinates show the number of steps this hex is away from the best SHQ and what the maximum number of steps is it can be away before receiving no further supply. The last graphic denotes the type of supply. In this example it is normal land supply.

Command Bar

Hex Commands

People's Tactics attack button image Attack

To attack a hex containing enemy units, you must first select this attack command. After that is done, you must select friendly, adjacent forces to participate in the attack. You do this by clicking on a friendly formation and then clicking on the single hex picture left of its name in the info box below the map. Keep in mind that a unit must have 2 Movement Points available in order to attack. You may select as many friendly units as you wish to join the attack, once you are done, click the “do attack” button located at the top of the screen. Or, to cancel, select the “cancel order” button.

People's Tactics new unit button image New Unit

Once you have clicked this button, a dialog will pop-up asking you which sort of formation you wish to create. Different formations require differing amounts of political points to create. Once the formation is created, it must be assigned to a chain of command (unless the formation you created was an SHQ). The new formation will also need units transferred in to it or it will disappear (Once again, this only applies to formations which are not SHQs).

People's Tactics production button image Production

This option can only be selected when a hex containing a city or town is highlighted. Once pressed, a window will open giving you command of what units you wish this city to produce. Note, you can also assign the city to generate Political Points instead. On the right hand of the window, you are able to instruct which SHQ the units shall be delivered to.

Formation Commands

People's Tactics move button image Move

Selecting this command will highlight a unit’s maximum range and allow you to move. A unit cannot move into the same hex as an enemy unit. To do that, the attack command must be used.

People's Tactics change command button image Change Command

This command is used to assign a new chain of command to the selected unit. In the case of a regular formation you select a new THQ to be its boss. In the case of a THQ you select its new SHQ. Once pressed, you must locate the new HQ for the unit and then confirm the choice with the buttons that appear at the top of the screen. Be advised, the unit that has its command changed will become less effective for a while and receive negative modifiers.

People's Tactics transfer button image Transfer

Once you have pressed this button, select the formation you wish to transfer units to and then confirm your choice with the “do transfer” button at the top of the screen. After you have done that a window will open in which you can select the quantity and the unit types that you wish to transfer. Keep in mind that normal formations can only transfer to other units within the hex they occupy. SHQs can transfer to formations or other SHQs beyond their own hex, but this is only as long as they have enough MOBCAP ( MOBility CAPacity for land transfer) and CARGOCAP (CARGO CAPacity for sea transfer). Another important point to remember is that units can only be transfered to other units in the same chain of command.

People's Tactics fortify button image Fortify

After clicking this command, you will have to select a neighbouring hex with which to fortify the border with. You need equal engineer and supply points to build the current level. Note that there are three levels of fortification possible. You must already have built 1 before you can upgrade it to level 2, and same for 2 to 3. The more engineers you have the less MP it costs you.

People's Tactics disband button image Disband

Removes the selected unit from play.

Naval Formation Extra Commands

People's Tactics load unit button image Load Unit

After selecting this command, you will have to select a unit you wish to load on to the ship and then confirm your selection with the buttons at the top of the screen. A ship cannot transport a unit if that unit exceeds the ships weight limit.

People's Tactics unload unit button image Unload Unit

After clicking this button the unit will unload if the ship is in a port, otherwise you will have to select a neighbouring hex as an unload destination and confirm this action by clicking the button at the top of the screen.

Air Formation Extra Commands

People's Tactics interdict button image Interdict

After clicking this button you will have to select an enemy formation that you want to interdict. After selecting this formation you will have to confirm this action by clicking the big button at the top of the screen.

People's Tactics strategic bombing button image Strategic Bombing

After clicking this button you will have to select a town hex that you want to bomb. After selecting this hex you will have to confirm this action by clicking the big button at the top of the screen.

People's Tactics airlift/airdrop button image Airdrop/Airlift

After clicking this button, PT might prompt you to select which formation you want to airdrop/airlift in case you have two land formations in the same hex. Otherwise it will assume you want to airdrop/airlift the only land formation in the hex. You must then select a destination. After selecting this hex you will have to confirm this action by clicking the big button at the top of the screen. The difference between airlift and airdrop is that if you select a friendly town as a destination it is an airlift, while if you select a (possibly enemy) non town-hex it is an airdrop. Keep in mind that only unit types with the “paradrop” ability can be airdropped.

People's Tactics air supply button image Air supply

After clicking this button you will have to select the formation that you wish to receive the air supply. After selecting this formation you will have to confirm this action by clicking the big button at the top of the screen. Keep in mind you can only select formations to receive air supply that are completely out of supply, and that are in open terrain.

General Commands

People's Tactics officer pool button image Officer Pool

This button will open up a menu that will allow you to manage your regime’s officer pool. You can spend Political Points to hire a new officer, you can fire an officer from the pool (that will teach him the price of failure!) or you can assign a different officer to the selected formation. Note, the selected formation is whichever one you had highlighted before you clicked the Officer Pool button. Keep in mind that your officers have different skill levels for ground, sea and air. You will want to assign the best possible leaders to your various formations, not assign a naval-genius to lead a panzer division!

People's Tactics research button image Research

This command will open a dialog in which you can select which fields of research to spend your Political Points. Each field will lead to new unit types that you will be able to produce in a friendly city. The most potent units in the game are usually found several fields deep; so don’t neglect your research!

People's Tactics diplomacy button image Diplomacy

This button will bring up the diplomacy screen, which is utilized in some scenarios for declaring war and making peace. Changing your relationship with a foreign regime costs Political Points.

People's Tactics end turn button image End Turn

This command will end your turn.