Jump to content

QEMU/Images

From Wikibooks, open books for an open world

Once QEMU has been installed, it should be ready to run a guest OS from a disk image. This image is a file that represents the data on a hard disk. From the perspective of the guest OS, it actually is a hard disk, and it can create its own filesystem on the virtual disk.

You can download a few guest OS images from the QEMU website, including a simple 8 MB image of a Linux distro (which is meant primarily for testing; note that it lacks the e1000 driver and therefore cannot do networking out-of-the-box). To run it, download and unzip the image in a folder and run the QEMU command.

qemu linux-0.2.img

When you do not have the plain command qemu try to run:

qemu-system-i386 linux-0.2.img

Replace linux-0.2.img with the name of your guest OS image file. If it has a GUI and you want to use your mouse with it, double-click on the window and QEMU will grab your mouse. To make QEMU release your mouse again, hold down the Control and Alt keys simultaneously, then let go - your mouse will be released back to X.

Aurélien Jarno of Debian has prepared a number of pre-packaged Debian QEMU images for several architectures, including ARM, Sparc, PowerPC, x86_64, and i386. They can be found at http://people.debian.org/~aurel32/qemu/

For some of the test kernels that you get, for example, the Sparc test image, you might get the error "No NFS Server available giving up" or some other message about needing to insert a "Root Floppy" or even a message specifying to fix the root option. If so then specify "root=/dev/ram" as an addition kernel command line option. This will then cause the test system to work. This is specifically true for the Sparc test files available from http://wiki.qemu.org/Testing, but probably for some of the others as well. If you are using the manager program for windows then just add the "root=/dev/ram/" in the advanced tab. Also turn off video and sound and if using qemu-system-sparcw.exe then change the filename to qemu-system-sparc.exe because some renamed it.

Image types

[edit | edit source]

QEMU supports several image types. The "native" and most flexible type is qcow2, which supports copy on write, encryption, compression, and VM snapshots.

QEMU currently can use these image types or formats:

raw
(default) the raw format is a plain binary image of the disc image, and is very portable. On filesystems that support sparse files, images in this format only use the space actually used by the data recorded in them.
cloop
Compressed Loop format, mainly used for reading Knoppix and similar live CD image formats
cow
copy-on-write format, supported for historical reasons only and not available to QEMU on Windows
qcow
the old QEMU copy-on-write format, supported for historical reasons and superseded by qcow2
qcow2
QEMU copy-on-write format with a range of special features, including the ability to take multiple snapshots, smaller images on filesystems that don't support sparse files, optional AES encryption, and optional zlib compression
vmdk
VMware 3 & 4, or 6 image format, for exchanging images with that product
vdi
VirtualBox 1.1 compatible image format, for exchanging images with VirtualBox.
vhdx
Hyper-V compatible image format, for exchanging images with Hyper-V 2012 or later.
vpc
Hyper-V legacy image format, for exchanging images with Virtual PC / Virtual Server / Hyper-V 2008.

Creating an image

[edit | edit source]

To set up your own guest OS image, you first need to create a blank disc image. QEMU has the qemu-img command for creating and manipulating disc images, and supports a variety of formats. If you don't tell it what format to use, it will use raw files. The "native" format for QEMU is qcow2, and this format offers some flexibility. Here we'll create a 3 GB qcow2 image to install Windows XP on:

qemu-img create -f qcow2 winxp.img 3G

The easiest way to install a guest OS is to create an ISO image of a boot CD/DVD and tell QEMU to boot off it. Many free operating systems can be downloaded from the Internet as bootable ISO images, and you can use them directly without having to burn them to disc.

Here we'll boot off an ISO image of a properly licensed Windows XP boot disc. We'll also give it 256 MB of RAM, but we won't use the kqemu kernel module just yet because it causes problems during Windows XP installation.

qemu -m 256 -hda winxp.img -cdrom winxpsp2.iso -boot d

Note: Depending on your distribution, you may need to use qemu-system-x86_64 command (when you using a 64-bit OS, also if you want to use KVM later).

To boot from a real CD or DVD, tell QEMU where to find it. On Linux systems, you can usually use a logical device name like /dev/cdrom or /dev/dvd, or the physical name of the device, e.g. /dev/sr0

qemu -m 256 -hda winxp.img -cdrom /dev/cdrom -boot d

QEMU will boot from the ISO image or CD/DVD and run the install program. If you have two screens, move the QEMU screen off to the spare one where you can keep an eye on the installer, but get on with something else - it will take a while!

Once the guest OS has installed successfully, you can shutdown the guest OS (e.g. in Windows XP, click on Start and then Shutdown). Once it has shutdown, start QEMU up with the kqemu kernel module to give it a little more speed.

qemu -m 256 -hda winxp.img -cdrom winxpsp2.iso -enable-kvm

If you are running an x86-64 Linux (i.e. 64-bit), you will need to run the x86-64 version of QEMU to be able to utilise kqemu:

qemu-system-x86_64 -m 256 -hda winxp.img -cdrom winxpsp2.iso -enable-kvm

qemu-img

[edit | edit source]

The qemu-img program is very powerful. Since you can convert between data formats you can move to an other emulator very quickly. Also can it read RAW-format, that means you can make a dump from a disk and convert it into e.g. qcow2. A feature that comes handy when you need to virtualise a brocken PC.

1. use ddrescue (or dd in case the drive is ok) to make a raw image

ddrescue /dev/diskin diskout.img diskout.map
note
dev/diskin is a placeholder like diskout.img, read the instructions for ddrescue (man ddrescue) before blindly copying lines, exspecialy on a brocken disk this may take some time

2. now convert the RAW image into qcow2

 qemu-img convert -p -f raw -O qcow2 diskout.img target.qcow2
note
again use man qemu-img programms evolve

be aware that qemu-img makes a copy, GOOD: you can do it again if something goes wrong; BAD: you need space, check first !

the resulting target.qcow2 can be used als disk with qemu-system-x86_64

Using multiple images

[edit | edit source]

QEMU can utilise up to four image files to present multiple virtual drives to the guest system. This can be quite useful, as in the following examples:

  • a pagefile or swapfile virtual disc that can be shared between QEMU guests
  • a common data drive where all data is stored, accessible from each QEMU guest but isolated from the host
  • giving additional space to a QEMU guest without reconfiguring the primary image
  • separating competing I/O operations onto different physical drive spindles by placing the separate QEMU images on different physical drives
  • emulating a multi-drive physical environment for testing / learning

Bear in mind that only one instance of QEMU may access an image at a time - shared doesn't mean shared simultaneously!

To use additional images in QEMU, specify them on the command line with options -hda, -hdb, -hdc, -hdd.

qemu -m 256 -hda winxp.img -hdb pagefile.img -hdc testdata.img -hdd tempfiles.img -enable-kvm

NB: QEMU doesn't support both -hdc and -cdrom at the same time, as they both represent the first device on the second IDE channel.

Copy on write

[edit | edit source]

The "cow" part of qcow2 is an acronym for copy on write, a neat little trick that allows you to set up an image once and use it many times without changing it. This is ideal for developing and testing software, which generally requires a known stable environment to start off with. You can create your known stable environment in one image, and then create several disposable copy-on-write images to work in.

To start a new disposable environment based on a known good image, invoke the qemu-img command with the backing_file option and tell it what image to base its copy on. When you run QEMU using the disposable environment, all writes to the virtual disc will go to this disposable image, not the base copy.

qemu-img create -f qcow2 -o backing_file=winxp.img test01.img 
qemu -m 256 -hda test01.img -enable-kvm &

Nota bene:

  1. don't forget to copy any important data out of the disposable environment before deleting it. When developing and testing software in copy-on-write virtual environments, it is a good idea to use version control software like Subversion or CVS on a server external to your virtual environment. Not only is it easy to keep copies of your work outside your virtual environment, it is also very easy to set up a new virtual environment from version control.
  2. backing_file image must be set as read-only on VMs, that will be using it directly. Otherwise, other images, based on this backing_file image will be corrupted, if there is some change have been made to the backing_file image.

Mounting an image on the host

[edit | edit source]

Sometimes it is helpful to be able to mount a drive image under the host system. For example, if the guest doesn't have network support, the only way to transfer files into and out of the guest will be by the storage devices it can address.

Linux and other Unix-like hosts can mount images created with the raw format type using a loopback device. From a root login (or using sudo), mount a loopback with offset.

mount -o loop,offset=32256 /path/to/image.img /mnt/mountpoint

To determine the correct offset you can run

fdisk -l /path/to/image.img

and the offset you need is the start of a partition multiplied by sector size. For example if start is 128 and sector size is 512 then the offset is 65536.


For example, to copy some files across to a FreeDOS hard drive image:

mkdir -p /mnt/freedos
mount -o loop,offset=32256 freedos-c.img /mnt/freedos
cp oldgames /mnt/freedos
umount /mnt/freedos

NB: never mount a QEMU image while QEMU is using it (unless -snapshot is used), or you are likely to corrupt the filesystem on the image.

Note: if you have an image without partitions you should omit the ,offset=32256 part. This is for instance the case if you want to mount linux-0.2.img (which can be found at the qemu web site at the time of writing).

For other types of qemu images, you can use qemu-nbd

modprobe nbd max_part=16
qemu-nbd -c /dev/nbd0 image.qcow2
partprobe /dev/nbd0
mount /dev/nbd0p1 /mnt/image

Using fdisk you can get information regarding the different partitions in nbd0.

$ fdisk /dev/nbd0
 Command (m for help): p
 Disk /dev/nbd0: 4294 MB, 4294967296 bytes
 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors
 Units = sectors of 1 * 512 = 512 bytes
 Sector size (logical/physical): 512 bytes / 512 bytes
 I/O size (minimum/optimal): 512 bytes / 512 bytes
 Disk identifier: 0x000183ca
      Device  Boot     Start        End      Blocks   Id  System
 /dev/nbd0p1   *        2048      499711      248832   83  Linux
 /dev/nbd0p2          501758     8386559     3942401    5  Extended
 /dev/nbd0p5          501760     8386559     3942400   8e  Linux LVM

LVM type partitions cannot be mounted using 'mount'. In such a case the image could be mounted with:

$ vgscan
  Reading all physical volumes. This may take a while...
  Found volume group "ub1110server-qemu" using metadata type lvm2
$ vgchange -ay
   2 logical volume(s) in volume group "ub1110server-qemu" now active
$ mount /dev/ub1110server-qemu/<LogicalVolumeName> /mnt/image

Replace <LogicalVolumeName> with the name of the logical volume present in the volume group. Finally, after the usage it's important to unmount the image and reverse other steps (depending on how the image was mounted):

$ umount /mnt/image
$ qemu-nbd -d /dev/nbd0
$ vgchange -an VolGroupName
$ killall qemu-nbd

"nbd" stands for "Network Block Device". Here we're using them locally, but one can also export the image for other hosts to use/mount. See qemu-nbd(8), nbd-client(8) for details.

The same can be done for raw images, but it's a lot less efficient than the loop method described above.

Another alternative for vmdk and raw images is to use vdfuse (http://forums.virtualbox.org/viewtopic.php?f=26&t=33355) which allows to access any image supported by VirtualBox.

Copying an image to a physical device

[edit | edit source]

It may be desired to copy a diskimage to a physical device. An example may be if building a cluster, it might be easier to get everything ready in qemu, then write the final diskimage to all of the hard drives. Of course your image will need to contain all of required configuration and drivers for the new system to boot properly.

The diskimage will need to be in raw format.

$ qemu-img convert -O raw diskimage.qcow2 diskimage.raw

Then you just dd it onto the hard drive.

# dd if=diskimage.raw of=/dev/sdX

Or, let qemu-img directly write onto the drive in one command:

# qemu-img convert -O raw diskimage.qcow2 /dev/sdX

Of course you need to be careful that you write it to the correct drive!

Getting information

[edit | edit source]

The qemu-img program can tell you about the format, virtual size, physical size, and snapshots inside an image.

$ qemu-img info test.vmdk 
(VMDK) image open: flags=0x2 filename=test.vmdk
image: test.vmdk
file format: vmdk
virtual size: 20M (20971520 bytes)
disk size: 17M
$ qemu-img info image-qcow.qcow2
image: image-qcow.qcow2
file format: qcow2
virtual size: 10G (10737418240 bytes)
disk size: 136K
cluster_size: 65536

Converting image formats

[edit | edit source]

The qemu-img program can be used to convert images from one format to another, or add compression or encryption to an image. Specify the source and target files for the image, and select from the following options:

  • -f fmt – optional, specify the format of the input file (QEMU can usually detect it)
  • -O fmt – specify the format of the output file
  • -e – use encryption in the output file (you will be prompted for a password)
  • -c – use compression in the output file (can't be used with encryption)
  • -6 – when converting to vmdk (VMware) format, make it compatible with VMware 6
qemu-img convert -O qcow2 test.vmdk test.qcow2

Exchanging images with VirtualBox

[edit | edit source]

qemu also supports the vdi format, so you can convert in both ways:

qemu-img convert -O vdi test.qcow2 test.vdi

qemu can use the vdi format for booting as well as a base image; because VirtualBox also supports this type of image, called there differencing image, a single (read-only) base copy could be shared simultaneously.

In any case, you may use the raw format (or an nbd device):

To convert a QEMU image for use with VirtualBox, first convert it to raw format, then use VirtualBox's conversion utility to convert and compact it in its native format. Note that the compact command requires the full path to the VirtualBox image, not just the filename.

qemu-img convert -O raw test.qcow2 test.raw
(1) VBoxManage convertdd test.raw test.vdi
VBoxManage modifyvdi /full/path/to/test.vdi compact

(1) or try:

VBoxManage convertfromraw -format VDI test.raw test.vdi
or
VBoxManage clonehd -format VDI test.raw test.vdi

Alternatively, you may use qemu-nbd to make the image available as raw as an nbd device, which VBoxManage can then convert.

qemu-nbd -c /dev/nbd0 test.qcow2
VBoxManage convertfromraw -format VDI /dev/nbd0 test.vdi

To convert a VDI back to raw, one may use VBoxManage again:

VBoxManage clonehd -format RAW test.vdi test.raw

or

VBoxManage internalcommands  converttoraw file.vdi file.raw

To use a VDI image from KVM without converting it, vdfuse may be used again.

vdfuse -f test.vdi ~/some-dir
kvm -hda ~/some-dir/EntireDisk ...