Jump to content

ROSE Compiler Framework/Abstract Syntax Tree

From Wikibooks, open books for an open world

The main intermediate representation of ROSE is its abstract syntax tree (AST). To use a programming language, you have to get familiar with the language syntax, semantics, etc. To use ROSE, you have to get familiar with its internal representation of an input code.

The best way to know AST is to visualize it using simplest code samples.

Visualization of AST

[edit | edit source]

Overview

[edit | edit source]

Three things are needed to visualize ROSE AST:

  • Sample input code: you provide it
  • a dot graph generator to generate a dot file from AST: ROSE provides dot graph generators
  • a visualization tool to open the dot graph: ZGRViewer and Graphviz are used by ROSE developers

If you don't want to install ROSE+ZGRview + Graphvis from scratch, you can directly use ROSE virtual machine image, which has everything you need installed and configured so you can just visualize your sample code.

Sample input code

[edit | edit source]

Please prepare simplest input code without including any headers so you can get a small enough AST to digest.

Dot Graph Generator

[edit | edit source]

We provide ROSE_INSTALLATION_TREE/bin/dotGeneratorWholeASTGraph (complex graph) and dotGenerator (a simpler version) to generate a dot graph of the detailed AST of input code.

Tools to generate AST graph in dot format. There are two versions

  • dotGenerator: simple AST graph generator showing essential nodes and edges
  • dotGeneratorWholeASTGraph: whole AST graph showing more details. It provides filter options to show/hide certain AST information.

command line:

 dotGeneratorWholeASTGraph  yourcode.c  // it is best to avoid including any header into your input code to have a small enough tree to visualize.

To skip builtin functions

  • dotGeneratorWholeASTGraph -DSKIP_ROSE_BUILTIN_DECLARATIONS yourcode.c
dotGeneratorWholeASTGraph -rose:help
   -rose:help                     show this help message
   -rose:dotgraph:asmFileFormatFilter           [0|1]  Disable or enable asmFileFormat filter
   -rose:dotgraph:asmTypeFilter                 [0|1]  Disable or enable asmType filter
   -rose:dotgraph:binaryExecutableFormatFilter  [0|1]  Disable or enable binaryExecutableFormat filter
   -rose:dotgraph:commentAndDirectiveFilter     [0|1]  Disable or enable commentAndDirective filter
   -rose:dotgraph:ctorInitializerListFilter     [0|1]  Disable or enable ctorInitializerList filter
   -rose:dotgraph:defaultFilter                 [0|1]  Disable or enable default filter
   -rose:dotgraph:defaultColorFilter            [0|1]  Disable or enable defaultColor filter
   -rose:dotgraph:edgeFilter                    [0|1]  Disable or enable edge filter
   -rose:dotgraph:expressionFilter              [0|1]  Disable or enable expression filter
   -rose:dotgraph:fileInfoFilter                [0|1]  Disable or enable fileInfo filter
   -rose:dotgraph:frontendCompatibilityFilter   [0|1]  Disable or enable frontendCompatibility filter
   -rose:dotgraph:symbolFilter                  [0|1]  Disable or enable symbol filter
   -rose:dotgraph:emptySymbolTableFilter        [0|1]  Disable or enable emptySymbolTable filter
   -rose:dotgraph:typeFilter                    [0|1]  Disable or enable type filter
   -rose:dotgraph:variableDeclarationFilter     [0|1]  Disable or enable variableDeclaration filter
   -rose:dotgraph:variableDefinitionFilter      [0|1]  Disable or enable variableDefinitionFilter filter
   -rose:dotgraph:noFilter                      [0|1]  Disable or enable no filtering
Current filter flags' values are: 
         m_asmFileFormat = 0 
         m_asmType = 0 
         m_binaryExecutableFormat = 0 
         m_commentAndDirective = 1 
         m_ctorInitializer = 0 
         m_default = 1 
         m_defaultColor = 1 
         m_edge = 1 
         m_emptySymbolTable = 0 
         m_expression = 0 
         m_fileInfo = 1 
         m_frontendCompatibility = 0 
         m_symbol = 0 
         m_type = 0 
         m_variableDeclaration = 0 
         m_variableDefinition = 0 
         m_noFilter = 0 

Dot Graph Visualization

[edit | edit source]

To visualize the generated dot graph, you have to install

Please note that you have to configure ZGRViewer to have correct paths to some commands it uses. You can do it from its configuration/setting menu item. Or directly modify the text configuration file (.zgrviewer).

One example configuration is shown below (cat .zgrviewer)

<?xml version="1.0" encoding="UTF-8"?>
<zgrv:config xmlns:zgrv="http://zvtm.sourceforge.net/zgrviewer">
    <zgrv:directories>
        <zgrv:tmpDir value="true">/tmp</zgrv:tmpDir>
        <zgrv:graphDir>/home/liao6/svnrepos</zgrv:graphDir>
        <zgrv:dot>/home/liao6/opt/graphviz-2.18/bin/dot</zgrv:dot>
        <zgrv:neato>/home/liao6/opt/graphviz-2.18/bin/neato</zgrv:neato>
        <zgrv:circo>/home/liao6/opt/graphviz-2.18/bin/circo</zgrv:circo>
        <zgrv:twopi>/home/liao6/opt/graphviz-2.18/bin/twopi</zgrv:twopi>
        <zgrv:graphvizFontDir>/home/liao6/opt/graphviz-2.18/bin</zgrv:graphvizFontDir>
    </zgrv:directories>
    <zgrv:webBrowser autoDetect="true" options="" path=""/>
    <zgrv:proxy enable="false" host="" port="80"/>
    <zgrv:preferences antialiasing="false" cmdL_options=""
        highlightColor="-65536" magFactor="2.0" saveWindowLayout="false"
        sdZoom="false" sdZoomFactor="2" silent="true"/>
    <zgrv:plugins/>
    <zgrv:commandLines/>
</zgrv:config>

You have to configure the run.sh script to have correct path also

cat run.sh

#!/bin/sh

# If you want to be able to run ZGRViewer from any directory,
# set ZGRV_HOME to the absolute path of ZGRViewer's main directory
# e.g. ZGRV_HOME=/usr/local/zgrviewer

ZGRV_HOME=/home/liao6/opt/zgrviewer-0.8.1

java -jar $ZGRV_HOME/target/zgrviewer-0.8.1.jar "$@"

Example session

[edit | edit source]

A complete example

# make sure the environment variables(PATH, LD_LIBRARY_PATH) for the installed rose are correctly set
which dotGeneratorWholeASTGraph
~/workspace/masterClean/build64/install/bin/dotGeneratorWholeASTGraph

# run the dot graph generator
dotGeneratorWholeASTGraph -c ttt.c

#see it
which run.sh
~/64home/opt/zgrviewer-0.8.2/run.sh

run.sh ttt.c_WholeAST.dot

example output

[edit | edit source]

We put some example source files and their AST dump files into: https://github.com/chunhualiao/rose-ast

[edit | edit source]

SageInterface functions


// You can call the following functions with gdb

   //! Pretty print AST horizontally, output to std output
   void SageInterface::printAST (SgNode* node); 


   //! Pretty print AST horizontally, output to a specified text file
   void SageInterface::printAST (SgNode* node, const char* filename); 

   //! Pretty print AST horizontally, output to a specified text file.
   void SageInterface::printAST2TextFile (SgNode* node, const char* filename, bool printTypes=true);

A translator (textASTGenerator) is also available, with its source code under exampleTranslators/defaultTranslator .

  • make install-tools will install this tool
  • textASTGenerator input.c will generate a text output of the entire AST

Example use inside of gdb

[edit | edit source]
  • to print a portion of AST to the screen
  • to print a portion of AST into a text file
(gdb) up
#7  0x00007ffff418ab5d in Unparse_ExprStmt::unparseExprStmt (this=0x1a1bf950, stmt=0x7fffda63ce30, info=...) at ../../../sourcetree/src/backend/unparser/CxxCodeGeneration/unparseCxx_statements.C:9889

(gdb) p SageInterface::printAST(stmt)
└──@0x7fffda63ce30 SgExprStatement transformation 0:0
    └──@0x7fffd8488790 SgFunctionCallExp transformation 0:0
        ├──@0x7fffe6211910 SgMemberFunctionRefExp transformation 0:0
        └──@0x7fffd7f2c370 SgExprListExp transformation 0:0
            └──@0x7fffd8488720 SgFunctionCallExp transformation 0:0
                ├──@0x7fffe6211988 SgMemberFunctionRefExp transformation 0:0
                └──@0x7fffd7f2c3d8 SgExprListExp transformation 0:0
$2 = void


(gdb) up 10
#48 0x00007ffff40dce69 in Unparser::unparseFile (this=0x7fffffff8c60, file=0x7fffeb786010, info=..., unparseScope=0x0) at ../../../sourcetree/src/backend/unparser/unparser.C:945
(gdb) p SageInterface::printAST2TextFile(file,"test.txt")

textASTGenerator

[edit | edit source]

Example command line use:

textASTGenerator -c test_qualifiedName.cpp

cat test_qualifiedName.cpp.AST.txt

└──@0x7fe9f1916010 SgProject
    └──@0xb45730 SgFileList
        └──@0x7fe9f17be010 SgSourceFile
            ├──@0x7fe9fdf19120 SgGlobal test_qualifiedName.cpp 0:0
            │   ├──@0x7fe9f159a010 SgTypedefDeclaration rose_edg_required_macros_and_functions.h 0:0
            │   │   └── NULL
            │   ├──@0x7fe9f159a390 SgTypedefDeclaration rose_edg_required_macros_and_functions.h 0:0
            │   │   └── NULL
            │   ├──@0x7fe9f0f59010 SgFunctionDeclaration rose_edg_required_macros_and_functions.h 0:0 "::feclearexcept"
            │   │   ├──@0x7fe9f1391010 SgFunctionParameterList rose_edg_required_macros_and_functions.h 0:0
            │   │   │   └──@0x7fe9f1258010 SgInitializedName rose_edg_required_macros_and_functions.h 0:0 "::__excepts"
            │   │   │       └── NULL
            │   │   ├── NULL
            │   │   └── NULL
            │   ├──@0x7fe9f0f59540 SgFunctionDeclaration rose_edg_required_macros_and_functions.h 0:0 "::fegetexceptflag"
            │   │   ├──@0x7fe9f1391630 SgFunctionParameterList rose_edg_required_macros_and_functions.h 0:0
            │   │   │   ├──@0x7fe9f1258420 SgInitializedName rose_edg_required_macros_and_functions.h 0:0 "::__flagp"
            │   │   │   │   └── NULL
            │   │   │   └──@0x7fe9f1258628 SgInitializedName rose_edg_required_macros_and_functions.h 0:0 "::__excepts"
            │   │   │       └── NULL
            │   │   ├── NULL
            │   │   └── NULL

              ...

            │   └──@0x7fe9eff218c0 SgFunctionDeclaration test_qualifiedName.cpp 14:1 "::foo"
            │       ├──@0x7fe9ef5e0320 SgFunctionParameterList test_qualifiedName.cpp 14:1
            │       │   ├──@0x7fe9ef495278 SgInitializedName test_qualifiedName.cpp 14:13 "x"
            │       │   │   └── NULL
            │       │   └──@0x7fe9ef495480 SgInitializedName test_qualifiedName.cpp 14:20 "y"
            │       │       └── NULL
            │       ├── NULL
            │       └──@0x7fe9ee8f3010 SgFunctionDefinition test_qualifiedName.cpp 15:1
            │           └──@0x7fe9ee988010 SgBasicBlock test_qualifiedName.cpp 15:1
            │               ├──@0x7fe9eee1ba90 SgVariableDeclaration test_qualifiedName.cpp 16:3
            │               │   ├── NULL
            │               │   └──@0x7fe9ef495688 SgInitializedName test_qualifiedName.cpp 16:3 "z"
            │               │       └── NULL
            │               ├──@0x7fe9ee7ad010 SgExprStatement test_qualifiedName.cpp 17:3
            │               │   └──@0x7fe9ee7dc010 SgAssignOp test_qualifiedName.cpp 17:5
            │               │       ├──@0x7fe9ee8c0010 SgVarRefExp test_qualifiedName.cpp 17:3
            │               │       └──@0x7fe9ee813010 SgAddOp test_qualifiedName.cpp 17:9
            │               │           ├──@0x7fe9ee8c0078 SgVarRefExp test_qualifiedName.cpp 17:7
            │               │           └──@0x7fe9ee84a010 SgMultiplyOp test_qualifiedName.cpp 17:12
            │               │               ├──@0x7fe9ee8c00e0 SgVarRefExp test_qualifiedName.cpp 17:11
            │               │               └──@0x7fe9ee881010 SgIntVal test_qualifiedName.cpp 17:13
            │               └──@0x7fe9ee77e010 SgReturnStmt test_qualifiedName.cpp 18:3
            │                   └──@0x7fe9ee8c0148 SgVarRefExp test_qualifiedName.cpp 18:10
            ├── NULL
            ├── NULL
            └── NULL

Render the AST in HTML

[edit | edit source]

The repo errington1/ast-to-html contains a tool for rendering the Rose abstract syntax "graph" as collapsible HTML with shared nodes and cycles represented by HTML links. For now, it's available only from the command line. The plan is to add command-line options to omit parts of the tree and to make the tool available as a library. For now, it somewhat arbitrarily omit portions of the tree that originate from the file rose_edg_required_macros_and_functions.h.

The command:

astToHTML file.C

will produce file.C.html which can be viewed with a browser:

firefox file.C.html

Sanity Check

[edit | edit source]

We provide a set of sanity check for AST. We use them to make sure the AST is consistent. It is also highly recommended that ROSE developers add a sanity check after their AST transformation is done. This has a higher standard than just correctly unparsed code to compilable code. It is common for an AST to unparse correctly but then fail on the sanity check.

The recommend sanity check is

  • AstTests::runAllTests(project); from src/midend/astDiagnostics. Internally, it calls the following checks:
    • TestAstForProperlyMangledNames
    • TestAstCompilerGeneratedNodes
    • AstTextAttributesHandling
    • AstCycleTest
    • TestAstTemplateProperties
    • TestAstForProperlySetDefiningAndNondefiningDeclarations
    • TestAstSymbolTables
    • TestAstAccessToDeclarations
    • TestExpressionTypes
    • TestMangledNames::test()
    • TestParentPointersInMemoryPool::test()
    • TestChildPointersInMemoryPool::test()
    • TestMappingOfDeclarationsInMemoryPoolToSymbols::test()
    • TestLValueExpressions
    • TestMultiFileConsistancy::test() //2009
    • TestAstAccessToDeclarations::test(*i); // named type test


There are some other functions floating around. But they should be merged into AstTests::runAllTests(project)

  • FixSgProject(*project); //in Qing's AST interface
  • Utility::sanityCheck(SgProject* )
  • Utility::consistencyCheck(SgProject*) // SgFile*

Text Output of an AST

[edit | edit source]

Just call: SgNode::unparseToString(). You can call it from any SgLocatedNode within the AST to dump partial AST's text format.

[edit | edit source]

SageInterface functions


   //! Pretty print AST horizontally, output to std output
   void SageInterface::printAST (SgNode* node); 

   //! Pretty print AST horizontally, output to a specified text file.
   void SageInterface::printAST2TextFile (SgNode* node, const char* filename);

A translator (textASTGenerator) is also available, with its source code under exampleTranslators/defaultTranslator .

Example use inside of gdb:

  • to print a portion of AST to the screen
  • to print a portion of AST into a text file
(gdb) up
#7  0x00007ffff418ab5d in Unparse_ExprStmt::unparseExprStmt (this=0x1a1bf950, stmt=0x7fffda63ce30, info=...) at ../../../sourcetree/src/backend/unparser/CxxCodeGeneration/unparseCxx_statements.C:9889

(gdb) p SageInterface::printAST(stmt)
└──@0x7fffda63ce30 SgExprStatement transformation 0:0
    └──@0x7fffd8488790 SgFunctionCallExp transformation 0:0
        ├──@0x7fffe6211910 SgMemberFunctionRefExp transformation 0:0
        └──@0x7fffd7f2c370 SgExprListExp transformation 0:0
            └──@0x7fffd8488720 SgFunctionCallExp transformation 0:0
                ├──@0x7fffe6211988 SgMemberFunctionRefExp transformation 0:0
                └──@0x7fffd7f2c3d8 SgExprListExp transformation 0:0
$2 = void


(gdb) up 10
#48 0x00007ffff40dce69 in Unparser::unparseFile (this=0x7fffffff8c60, file=0x7fffeb786010, info=..., unparseScope=0x0) at ../../../sourcetree/src/backend/unparser/unparser.C:945
(gdb) p SageInterface::printAST2TextFile(file,"test.txt")

Example command line use:

textASTGenerator -c test_qualifiedName.cpp

cat test_qualifiedName.cpp.AST.txt

└──@0x7fe9f1916010 SgProject
    └──@0xb45730 SgFileList
        └──@0x7fe9f17be010 SgSourceFile
            ├──@0x7fe9fdf19120 SgGlobal test_qualifiedName.cpp 0:0
            │   ├──@0x7fe9f159a010 SgTypedefDeclaration rose_edg_required_macros_and_functions.h 0:0
            │   │   └── NULL
            │   ├──@0x7fe9f159a390 SgTypedefDeclaration rose_edg_required_macros_and_functions.h 0:0
            │   │   └── NULL
            │   ├──@0x7fe9f0f59010 SgFunctionDeclaration rose_edg_required_macros_and_functions.h 0:0 "::feclearexcept"
            │   │   ├──@0x7fe9f1391010 SgFunctionParameterList rose_edg_required_macros_and_functions.h 0:0
            │   │   │   └──@0x7fe9f1258010 SgInitializedName rose_edg_required_macros_and_functions.h 0:0 "::__excepts"
            │   │   │       └── NULL
            │   │   ├── NULL
            │   │   └── NULL
            │   ├──@0x7fe9f0f59540 SgFunctionDeclaration rose_edg_required_macros_and_functions.h 0:0 "::fegetexceptflag"
            │   │   ├──@0x7fe9f1391630 SgFunctionParameterList rose_edg_required_macros_and_functions.h 0:0
            │   │   │   ├──@0x7fe9f1258420 SgInitializedName rose_edg_required_macros_and_functions.h 0:0 "::__flagp"
            │   │   │   │   └── NULL
            │   │   │   └──@0x7fe9f1258628 SgInitializedName rose_edg_required_macros_and_functions.h 0:0 "::__excepts"
            │   │   │       └── NULL
            │   │   ├── NULL
            │   │   └── NULL

              ...

            │   └──@0x7fe9eff218c0 SgFunctionDeclaration test_qualifiedName.cpp 14:1 "::foo"
            │       ├──@0x7fe9ef5e0320 SgFunctionParameterList test_qualifiedName.cpp 14:1
            │       │   ├──@0x7fe9ef495278 SgInitializedName test_qualifiedName.cpp 14:13 "x"
            │       │   │   └── NULL
            │       │   └──@0x7fe9ef495480 SgInitializedName test_qualifiedName.cpp 14:20 "y"
            │       │       └── NULL
            │       ├── NULL
            │       └──@0x7fe9ee8f3010 SgFunctionDefinition test_qualifiedName.cpp 15:1
            │           └──@0x7fe9ee988010 SgBasicBlock test_qualifiedName.cpp 15:1
            │               ├──@0x7fe9eee1ba90 SgVariableDeclaration test_qualifiedName.cpp 16:3
            │               │   ├── NULL
            │               │   └──@0x7fe9ef495688 SgInitializedName test_qualifiedName.cpp 16:3 "z"
            │               │       └── NULL
            │               ├──@0x7fe9ee7ad010 SgExprStatement test_qualifiedName.cpp 17:3
            │               │   └──@0x7fe9ee7dc010 SgAssignOp test_qualifiedName.cpp 17:5
            │               │       ├──@0x7fe9ee8c0010 SgVarRefExp test_qualifiedName.cpp 17:3
            │               │       └──@0x7fe9ee813010 SgAddOp test_qualifiedName.cpp 17:9
            │               │           ├──@0x7fe9ee8c0078 SgVarRefExp test_qualifiedName.cpp 17:7
            │               │           └──@0x7fe9ee84a010 SgMultiplyOp test_qualifiedName.cpp 17:12
            │               │               ├──@0x7fe9ee8c00e0 SgVarRefExp test_qualifiedName.cpp 17:11
            │               │               └──@0x7fe9ee881010 SgIntVal test_qualifiedName.cpp 17:13
            │               └──@0x7fe9ee77e010 SgReturnStmt test_qualifiedName.cpp 18:3
            │                   └──@0x7fe9ee8c0148 SgVarRefExp test_qualifiedName.cpp 18:10
            ├── NULL
            ├── NULL
            └── NULL

AST Iterator

[edit | edit source]

1) The iterator class: The iterator follows the STL iterator pattern and is implemented as pre-order traversal and maintains its own stack. The iterator performs the exact same traversal as the traversal classes in ROSE (it is using the same underlying information):

#include "RoseAst.h"
SgNode* node= .... // any subtree

RoseAst ast(node);

for(RoseAst::iterator i=ast.begin();i!=ast.end();++i) {
   cout<<"We are here:"<<(*i)->class_name()<<endl;
}

Some more features:

  • By default it is not traversing null pointers (you won't see them). However, if you want to see&traverse also all the null pointers, you can use the begin function with: ast.begin().withNullValues()
  • It also has a feature to exclude subtrees from traversing during the traversal: You can simply call on the *iterator*:
    • i.skipChildrenOnForward(); ++i; // skips the children of current node and goes to the next node that follows in the traversal after all those children

Relevant sourcefiles

Content of AST

[edit | edit source]

SgType

[edit | edit source]

Some useful member functions

  • get_base_type() :member function on some IR nodes derived from SgType and returns the non-recursively striped (immediate) type under the typedefs, reference, pointers, arrays, modifiers, etc.
  • findBaseType() recursively strip away all
        typedefs, SgTypedefType
        reference, SgReferenceType
        pointers, SgPointerType
        arrays, SgArrayType
        modifiers SgModifierType
  • SgType * stripType (unsigned char bit_array=STRIP_MODIFIER_TYPE|STRIP_REFERENCE_TYPE|STRIP_POINTER_TYPE|STRIP_ARRAY_TYPE|STRIP_TYPEDEF_TYPE) const

Returns hidden type beneath layers of typedefs, pointers, references, modifiers, array representation, etc.

  • SgType * stripTypedefsAndModifiers () const

File location information

[edit | edit source]

All AST nodes with file location information derive from SgLocatedNode, which has start and end Sg_File_Info to indicate begin and end location information.

You can obtain and printout the pair of location information by calling

locatedNode->get_startOfConstruct()->display() ; 

locatedNode->get_endOfConstruct()->display() ;

// get beginning info only
locatedNode->get_file_info()->display() ;

The output for display() may look like

Inside of Sg_File_Info::display(debug.......) 
     isTransformation                      = false 
     isCompilerGenerated                   = true (no position information) 
     isOutputInCodeGeneration              = false 
     isShared                              = false 
     isFrontendSpecific                    = true (part of ROSE support for gnu compatability) 
     isSourcePositionUnavailableInFrontend = false 
     isCommentOrDirective                  = false 
     isToken                               = false 
     file_id  = 2 
     filename = /home/liao6/daily-test-rose/upcwork/install/include/gcc_HEADERS/rose_edg_required_macros_and_functions.h 
     line     = 167  column   = 1 


.... // transformation generated, will be outputted by the unparser
upcr_pshared_ptr_t gsj;
Inside of Sg_File_Info::display(debug.......) 
     isTransformation                      = true (part of a transformation) 
     isCompilerGenerated                   = false 
     isOutputInCodeGeneration              = true (output in code generator) 
     isShared                              = false 
     isFrontendSpecific                    = false 
     isSourcePositionUnavailableInFrontend = false 
     isCommentOrDirective                  = false 
     isToken                               = false 
     file_id  = -3 
     filename = transformation 
     line     = 0  column   = 0 

As you can see, there are AST nodes generated by ROSE's frontends or by a translator. A transformation generated located node may not have line or column numbers.

You can get file name, line, column numbers

 SgLocatedNode* node =  .... ;

  Sg_File_Info* info_start = node->get_startOfConstruct ();
  size_t a_start = (size_t)info_start->get_line ();

   string filename = node->get_file_info()->get_filename();

  Sg_File_Info* info_end = node->get_endOfConstruct ();
  size_t a_end = (info_end == NULL) ? a_start : info_end->get_line ();

Preprocessing Information

[edit | edit source]

See more at ROSE Compiler Framework/PreprocessingInfo

In addition to nodes and edges, ROSE AST may have attributes in addition to nodes and edges that are attached for preprocessing information like #include or #if .. #else. They are attached before, after, or within a nearby AST node (only the one with source location information.)

An example translator will traverse the input code's AST and dump information which may include preprocessing information.

For example

exampleTranslators/defaultTranslator/preprocessingInfoDumper -c main.cxx
-----------------------------------------------
Found an IR node with preprocessing Info attached:
(memory address: 0x2b7e1852c7d0 Sage type: SgFunctionDeclaration) in file
/export/tmp.liao6/workspace/userSupport/main.cxx (line 3 column 1)
-------------PreprocessingInfo #0 ----------- :
classification = CpreprocessorIncludeDeclaration:
  String format = #include "all_headers.h"

relative position is = before

Source: http://www.rosecompiler.org/ROSE_Tutorial/ROSE-Tutorial.pdf (Chapter 29 - Handling Comments, Preprocessor Directives, And Adding Arbitrary Text to Generated Code)

ROSE Compiler Framework/AST Matching

AST Construction

[edit | edit source]

SageBuilder and SageInterface namespaces provide functions to create ASTs and manipulate them. Doxygen docs