LaTeX/PGF/TikZ

Example of graphics done with Tikz. Note the slightly translucent top layer.

One way to draw graphics directly with TeX commands is PGF/TikZ. TikZ can produce portable graphics in both PDF and PostScript formats using either plain (pdf)TEX, (pdf)Latex or ConTEXt. It comes with very good documentation and an extensive collection of examples: http://www.texample.net/tikz/

PGF ("portable graphics format") is the basic layer, providing a set of basic commands for producing graphics, and TikZ ("TikZ ist kein Zeichenprogramm" or "TikZ is not a Drawing program") is the frontend layer with a special syntax, making the use of PGF easier. TikZ commands are prevalently similar to Metafont, the option mechanism is similar to PsTricks syntax.

While the previous systems (picture, epic, pstricks or metapost) focus on the how to draw, TikZ focuses more on the what to draw. One could say that TikZ is to picture as LaTeX is to TeX. It's recommended to use it if your LaTeX distribution includes it.

Other packages building on top of TikZ (e.g., for drawing electrical circuits) can be found here: https://www.ctan.org/topic/pgf-tikz

In the following some basics of TikZ are presented.

Loading package, libraries - tikzpicture environment

Using TikZ in a LaTeX document requires the tikz package which can be loaded by adding following command in preamble of latex document:

\usepackage{tikz}                    % in preamble

This will provide basic functionalities, and also load the pgf package automatically. For special features special libraries must be included. It requires following in the preamble part of the code.

\usetikzlibrary{⟨list of libraries separated by commas⟩}   % general syntax, in preamble

For example

\usetikzlibrary{arrow,pattern, snakes}               % in preamble

A list of common libraries is following

Library Name	Description
\usetikzlibrary{arrows.meta}	Arrow library that provides different types of arrow tips (Note: \usetikzlibrary{arrows} is deprecated).
\usetikzlibrary{automata}	Automata Drawing Library that is used for drawing the finite state automata and Turing Machines.
\usetikzlibrary{backgrounds}	Background Library that "defines background for pictures".
\usetikzlibrary{calc}	Library to make complex coordinate calculations.
\usetikzlibrary{calendar}	This library is used to display calendars (I guess it's a Ronseal thing).
\usetikzlibrary{chains}	Chain library to align nodes o chains.
\usetikzlibrary{decorations}	Decorations libraries to decorate paths
\usetikzlibrary{er}	Entity Relationship Diagram Library.
\usetikzlibrary{intersections}	to calculate intersections of paths.
\usetikzlibrary{matrix}	Matrix Library that places each item as a node in same way as in a matrix. Each node can then be identified and manipulated.
\usetikzlibrary{fadings}	Allows for fading shapes in specified patterns.
\usetikzlibrary{folding}	Paper folding library.
\usetikzlibrary{patterns}	It provides different patterns for filling in area (horizontal lines, vertical lines, north east lines, north west lines, grid, crosshatch, dots, crosshatch dots, fivepointed stars, sixpointed stars).
\usetikzlibrary{petrinet}	It is used to draw Petri Nets, as used for mathematical modelling. As with other similar flowchart style diagrams, each node and edge is defined, as well as their style and position. Tokens can also be embedded within nodes, by treating them as children and child nodes.
\usetikzlibrary{shapes.geometric}	It can help in drawing different types of shapes e.g., a polygon of n sides, star shape with n points, forbidden sign (e.g. No Smoking sign), and split circle.
\usetikzlibrary{shapes.misc}
\usetikzlibrary{shadings}	Allows for a number of shading macros and patterns to be applied to any shape.
\usetikzlibrary{shadows}	Defines styles that help by adding (partly)transparent shadows to paths and/or nodes.
\usetikzlibrary{snakes}	It helps in drawing curves like- snake, spring, expanding wave, etc.
\usetikzlibrary{spy}	Allows for magnifying of chosen segments of previously defined patterns and shapes, think fractals and non-uniform plots.
\usetikzlibrary{trees}	Each point on the tree is defined as a node, with children, and each child can have its own children. The tree's direction can also be specified, as well as the angle at which children emerge, however, when left to its own devices, the results are acceptable.
\usetikzlibrary{mindmap}	Mind map library to show parent-child type relation in a more creative way.

Tikz environment

The figures are drawn in the main body part the Tex document. There are two ways to use it

1. Inline Mode: Which should be used when you want to draw inline with text.

   \tikz[⟨options⟩]{⟨tikz commands⟩}
   

   One special option for this case is baseline = <dimension>. Without that option the lower end of the picture is put on the baseline of the surrounding text. Using this option, you can specify that the picture should be raised or lowered such that the height ⟨dimension⟩ is on the baseline.
2. Tikzpicture environement: The drawing commands have to be enclosed in an "tikzpicture" environment

   \begin{tikzpicture}[⟨options⟩] 
     ⟨tikz commands⟩
   \end{tikzpicture}
   

The entire figure can be scaled using the

scale=⟨factor⟩

or different for height and width, e.g:

xscale=2.5, yscale=0.5

Specifying coordinates

Coordinates are specified in round brackets in an arbitrary TEX dimension either using Cartesian coordinates (comma separated), e.g. 1cm in the x direction and 2pt in the y direction

Coordinate type	Syntax	Example
Cartesian	(x,y)	(1cm,2pt)
Polar	(theta:radius)	(30:1cm)
Relative to last position	++(x,y)	++(2cm,2cm)

In the first row of table the Cartesian coordinates (comma separated) are shown. In the second row the polar coordinates (colon separated), e.g. 1cm in 30 degree direction

Relative coordinates to the previous given point are given by adding one or two plus signs in front of the coordinate. With "++" the last point of the path becomes the current position, with "+" the previous point stays the current path position. Example: 2 standard units to the right of the last point used:

Note:

1. Without specifying a unit (1,2), the standard one is cm (1cm,2cm).
2. The positive x and y directions refer to right and up on a diagram respectively.
3. The angle are measured from x axis and positive for a counter-clockwise direction. This means 0 degrees pointing directly right and 90 degree point up.

The coordinates can be associated with a name, e.g. A= (2,3), in many ways as stated following

1. When we know exact coordinates values for a point, then following command can be used. \coordinate (A) at (2,3);
2. When a point is specified with respect to some other point one should use the path command. \path (A)  ++(45:2) coordinate (B);. The command says- start from coordinate A, move along 45 degree direction for 2cm, and this final location coordinate should be assigned to B.
3. To define the coordinates and place a text as well use the node command. \node (A) at (90:0) {Coordinate Name}

Syntax for paths

A path is a series of straight and curved line segments (in a simplified explanation). The instruction has to end with a semicolon.

\path[<options>]⟨specification⟩;

One instruction can spread over several lines, or several instructions can be put on one line.

Path actions

Options for path actions are e.g: "draw", "fill", "pattern", "shade", "clip" , "use as bounding box". These may be used as following

\path[draw]             % Draw the line/curve 
\path[fill]             % Fill the area under the curve
\path[fill,draw]        % Fill as well as draw the lines (borders)
\path[pattern]          % 
\path[shade]            % a variation on filling that changes colors smoothly from one to another
\path[shade,draw]       % shade as well as draw 
\path[clip]             % all subsequent drawings up to the end of the current scope are clipped against the current path and the size of subsequent paths will not be important for the picture size 
\path[use as bounding box]

Above command can also be written equivalently as "\draw", "\fill", "\filldraw", "\pattern", "\shade", "\shadedraw", "\clip", "\useasboundingbox" . These commands are explained in details in subsequent section

Geometric path actions

Geometric path options: "rotate=<angle in degree>", "xshift=<length>", "yshift=<length>", "scale=<factor>", "xscale=<factor>", "yscale=<factor>".

Color and opacity

The most common way is to specify just the color name or "color=<color name>". In this case it will color the boarders/area according to the command (\draw,\fill) used.

There can be different elements in a drawing so it may require specifying them separately for which one may use

"draw=<line color>", "draw opacity=<factor>"

"fill=<fill color>", "fill opacity=<factor>"

"text=<text color>", "text opacity=<factor>"

"pattern color=<color>",

..etc

Predefined colors: red, green, blue, cyan, magenta, yellow, black, gray, darkgray, lightgray, brown, lime, olive, orange, pink, purple, teal, violet and white.

The opacity factor values can be in range of 0 (=fully transparent) to 1 (=fully opaque).

Line width

Line width options: "line width=<dimension>", and abbreviations "ultra thin" for 0.1pt, "very thin" for 0.2pt, "thin" for 0.4pt (the default width), "semithick" for 0.6pt, "thick" for 0.8pt, "very thick" for 1.2pt, "ultra thick" for 1.6pt.

Line end

Line end, line join options: "line cap=<type: round, rect, or butt>", "arrows=<start arrow kind>-<end arrow kind>", "rounded corners", "rounded corners=<size>", "line join=<type: round, bevel, or miter>".

Line pattern

Line pattern options: "dash pattern=<dash pattern>" (e.g. "dash pattern=on 2pt off 3pt on 4pt off 4pt"), "dash phase=⟨dash phase⟩", "solid", "dashed", "dotted", "dashdotted", "densely dotted", "loosely dotted", "double".

Options for filling paths are e.g. "fill=<fill color>", "pattern=<name>", "pattern color=<color>"

The \draw command

The draw command can be used in several ways with different options. A few examples are provided as follows.

Drawing straight lines

1. Straight lines are given by coordinates separated by a double minus .

\draw (1,0) -- (0,0) -- (0,1);

1. A connected path can be closed using the "--cycle" option, which connects the last and first coordinate by a straight line.

\draw (1,0) -- (0,0) -- (0,1) -- cycle;

1. A further move-to operation in an existing path starts a new part of the path, which is not connected to the previous part of the path. Here: Move to (0,0) straight line to (2,0), move to (0,1) straight line to (2,1).

\draw (0,0) -- (2,0) (0,1) -- (2,1);

1. Two points can be connected by straight lines that are only horizontal and vertical. For a connection that is first horizontal and then vertical, use

\draw (0,0) -| (1,1);

or first vertical then horizontal, use

\draw (0,0) |- (1,1);

Drawing curved paths

1. Bezier curve can be drawn using the "..controls() ..()" command, with one or two control points.

\draw (0,0) .. controls (1,1) .. (4,0) (5,0) .. controls (6,0) and (6,1) .. (5,2);

1. User-defined paths can be created using the "to" operation. Without an option it corresponds to a straight line, exactly like the double minus command. Using the "out" and "in" option a curved path can be created. E.g. "[out=135,in=45]" causes the path to leave at an angle of 135 degree at the first coordinate and arrive at an angle of 45 degree at the second coordinate.

\draw (0,0) to (3,2); \draw (0,0) to[out=90,in=180] (3,2); \draw (0,0) to[bend right] (3,2);

(The syntax for a bend to the right may seem a little counter-intuitive. Think of it as an instruction to veer to the right at the beginning of the path and then smoothly curve to the end point, not as saying that the path curves to the right throughout its length.)

Draw special curves :

1. Rectangle

   \draw (0,0) rectangle (2,3);
   

2. Circle & Ellipses: The command "circle" can be used to draw both circle and ellipses. For circle only radius is required, while for ellipse length of major axis and minor axis is required.

\draw (0,0) circle [radius=1.5]; \draw (0,0) circle (2cm); % old syntax with round brackets instead of square brackets \draw (0,0) circle [x radius=1.5cm, y radius=10mm]; \draw (0,0) circle (1.2cm and 8mm); % old syntax \draw (0,0) circle [x radius=1cm, y radius=5mm, rotate=30]; \draw[rotate=30] (0,0) ellipse (20pt and 10pt); % old syntax

1. Arcs: The command "arc" creates a part of a circle or an ellipse.

\draw (0,0) arc (0:270:8mm); \draw (0,0) arc (0:315:1.75cm and 1cm); \filldraw[fill=cyan, draw=blue] (0,0) -- (12mm,0mm) arc (0:30:12mm) -- (0,0);

Or in an alternative syntax:

\draw (0,0)  arc[radius = 8mm, start angle= 0, end angle= 270];
\draw (0,0)  arc[x radius = 1.75cm, y radius = 1cm, start angle= 0, end angle= 315];

1. Helplines, Parabola, Sine and Cosine curve: There are many more predefined commands for special paths, like "grid", "parabola", "sin", "cos" (sine or cosine curve in the interval [0,π/2]). The option "help lines" denotes "fine gray".

\draw[help lines] (0,0) grid (2,3); \draw[step=0.5, gray, very thin] (-1.4,-1.4) grid (1.4,1.4); \draw (0,0) parabola (1,1.5) parabola[bend at end] (2,0); \draw (0,0) sin (1,1) cos (2,0) sin (3,-1) cos (4,0) sin (5,1);

Changing line appearance using Options

The line has many attributes which can be altered according requirement. For example in following example we chose the line color as red, line pattern as dashed, and the line width as very thick.

\draw[red, dashed, very thick, rotate=30] (1,0) -- (0,0) -- (0,1);

Examples for changing the arrow tips

\draw [->] (0,0) -- (30:20pt); \draw [<->] (1,0) arc (180:30:10pt); \draw [<<->] (2,0) -- ++(0.5,10pt) -- ++(0.5,-10pt) -- ++(0.5,10pt);

List of options for changing the line appearance.

Description	Option passed	Acceptable Value	Remark
Changing width of line	line width=1mm	any	The values can be provided in pt, mm, cm, in, etc
	line width= thick	ultra thin, very thin, thin semi thick thick very thick ultra thick	These values are corresponding to (0.1pt, 0.2pt, 0.4pt, 0.6pt, 0.8pt, 1.2pt, 1.6pt)
Changing the line end shape	line cap = round	round, rect, butt
Changing the line pattern	solid	solid, dashed, dotted, dash dotted, densely dotted, loosely dotted, double,	Predefined line patterns
	dash pattern=on 2pt off 3pt on 4pt off 4pt		Customized line pattern
Arrow type	arrow= <->	>,<, >>, >>, latex, stealth,
Joining lines	line join= miter	round, bevel, miter
Example: \draw[very thick, line cap=round, arrow=latex-latex, line join=round] (0,0)--(3,2);

For rectangles a special syntax exists. Use a move-to operation to one corner and after "rectangle" the coordinates of the diagonal corner. The last one becomes the new current point.

\draw (0,0) rectangle (1,1); \shade[top color=yellow, bottom color=black] (0,0) rectangle (2,-1); \filldraw[fill=green!20!white, draw=green!40!black] (0,0) rectangle (2,1);

The fill color "green!20!white" means 20% green and 80% white mixed together.

The \node command

A node is used to place some text at given coordinate. Nodes are not part of the path itself, they are added to the picture after the path has been drawn.

The node can be placed inside rectangle or circle or other simple shapes. A node can be placed in several ways

1. Using the \node command. The syntax of the command is \node[options] (Name) at (coordinates) {Text};

   %% syntax
   %% \node[options] (Name of node) at (coordinates) {Text to appear};
   % Example for usage
   \node[red,rectangle] at (0,0) {Some text}; % To place some text only
   \node (A) at (0,0) {}; % To define a new coordinate
   

   The name of node should be given in parenthesis. An example is given following, where two nodes are drawn and first is within the circle and second is in the rectangle.

   \begin{tikzpicture}
   	\node (A) at (0,0) [thick,blue, circle,fill=blue!50] {Encoder};   % node A
   	\node (B) at (3,0) [thick,blue,rectangle,fill=green!80!black] {Decoder}; % node B
   	\draw[->,ultra thick] (A)--(B); % line joining node A and B
   \end{tikzpicture}
   

2. Using the keyword node with other command viz. \draw and \path command.

   \draw (0,0) node{a} -- (1,1) node {b};
   \path (0,0) node{a} -- (1,1) node {b};
   

Different options are available, some of which are described in below table. A few examples are provided later for their better explanation.

Description	Option passed	Admissible values	Remark
Position of text along a path	pos=.5	> 0	The text will be place along path at beginning (=0), in middle (=.5) and at end(=1). (default=1)
Alignment of text	align=left	left, right, center	The text/paragraph is aligned accordingly (default=center).
Place the text wrt a given point	anchor=top	left, right, top, bottom, top left, top right, bottom left, bottom right.	Assuming the point as origin there are 4 directions (x,-x, y, -y) for which left,right,top,bottom corresponds. 4 quadrants (I,II,III,IV).
	anchor=north	east,west, north, south, north east, north west, south east, south west	Same as above but now direction are specified with north, east, west, south.
Text enclose in shape		rectangle, circle,	Associated parameter should be passed along with option.
Distance between the enclosed shape and the text	Inner sep =.5
Distance of the enclosing shape from the point	Outer sep =.8
Minimum size of the shape irrespective of the text length.	minimum width = 2cm	any value>0	The width of the shape (lets assume a rectangle) will be at least 2cm even for a single letter. However, size may increase for very lengthy text. Note: The size of node = max(minimum width, inner sep). To achieve smaller size, you must reduce both.
	minimum height = 2cm	any value>0	Minimum height of the node containing shape
	minimum size = 2cm	any value>0	Minimum height as well as width of the shape.
The aspect ratio of the shape to be maintained	shape aspect = 1		The shape enclosing text will change its dimension maintaining this aspect ratio.
coloring text, color shape, etc.	fill= red, draw=green		This is usual as described in earlier color and opacity options.
Aligning the text along the curve	sloped

A few examples are given below to explain the options

Writing text along a given path using the node command is shown as a simple example:

\draw[dotted] (0,0) node {1st node} -- (1,1) node {2nd node} -- (0,2) node {3rd node} -- cycle;

\fill[fill=yellow] (0,0) node {1st node} -- (1,1) node[circle,inner sep=0pt,draw] {2nd node} -- (0,2) node[fill=red!20,draw,double,rounded corners] {3rd node};

To place nodes on a line or a curve use the "pos=<fraction>" option, where fraction is a floating point number between 0 representing the previous coordinate and 1 representing the current coordinate.

\draw (0,0) -- (3,1) node[pos=0]{0} node[pos=0.5]{1/2} node[pos=0.9]{9/10};

There exist some abbreviations: "at start" for "pos=0", "very near start" for "pos=0.125", "near start" for "pos=0.25", "midway" for "pos=0.5", "near end" for "pos=0.75", "very near end" for "pos=0.875", "at end" for "pos=1".

The "sloped" option causes the node to be rotated to become a tangent to the curve.

Since nodes are often the only path operation on paths, there are special commands for creating

paths containing only a node, the first with text output, the second without:

\node[<options>](<name>) at (<coordinate>){<text>};
\coordinate[<options>](<name>) at (<coordinate>);

One can connect nodes using the nodes' labels as coordinates. Having "\path(0,0) node(x) {} (3,1) node(y) {};" defined, the node at (0,0) got the name "(x)" and the one at (3,1) got the name "(y)".

\path (0,0) node(x) {} (3,1) node(y) {}; \draw (x) -- (y);

Equivalent to

\coordinate (x) at (0,0); 
\coordinate (y) at (3,1);
\draw (x) -- (y);

Multiline text can be included inside a node. A new line is indicated by double backslash "\\", but additionally you have to specify the alignment using the node option "align=". Here an example:

\filldraw (0,0) circle (2pt) node[align=left, below] {test 1\\is aligned left} -- (4,0) circle (2pt) node[align=center, below] {test 2\\is centered} -- (8,0) circle (2pt) node[align=right, below] {test 3\\is right aligned};

Path construction operations try to be clever, such that the path starts at the border of the node's shape and not from the node's center.

\path (0,0) node(x) {Hello World!} (3,1) node[circle,draw](y) {$\int_1^2 x \mathrm d x$}; \draw[->,blue] (x) -- (y); \draw[->,red] (x) -| node[near start,below] {label} (y); \draw[->,orange] (x) .. controls +(up:1cm) and +(left:1cm) .. node[above,sloped] {label} (y);

Once the node x has been defined, you can use anchors as defined above relative to (x) as "(x.<anchor>)", like "(x.north)".

Placing circles along the drawn curve:

In this case a curve is drawn and over that curve some circles are placed at specified positions. This trick makes use of "foreach command" whose details can be found in the special command section.

\draw[very thick] (0.5,0.5) .. controls (2,1).. (2.5,2.5)
	node foreach \p in {0,0.25,...,1} [circle,fill=red,pos=\p,inner sep=0pt,minimum size=1.5mm]{};	
\node[left] at (.5,.30){A};
\node[right] at (2.5,2.5){B} ;	
\path[ultra thick,latex-latex] (2,0) --(0,0)--(0,1.5);

The \clip command

The clip command is used to remove the portion outside the given shape (e.g. rectangle or circle).

\begin{tikzpicture}
	\clip (1,1)  circle (2);
	\draw[red,fill] (0,0) rectangle (3,3);		
\end{tikzpicture}

Special commands

Tikzstyle

It is a very useful command when you need to set several different shapes with same parameters (i.e., width, color, etc). Therefore you can define one or more style in the beginning, as shown below and then you may use it later anywhere in the Tikz code.

\begin{tikzpicture}[
mycircle/.style={circle, draw=green!60, fill=green!5, ultra thick, minimum size=7mm},
myline/.style={dotted, blue!60,->},
]
\draw[myline] (0,0)node[mycircle]{$\pi$} to[out=45,in=135]  (5,1) node[mycircle]{3.414...};
\end{tikzpicture}

Above syntax allows you to define at the beginning of the picture. Alternatively the tikzstyle command can also be used to define it as follows.

\begin{tikzpicture}
\tikzset{mycircle/.style={circle, draw=green!60, fill=green!5, ultra thick, minimum size=7mm}}
\tikzset{myline/.style={dotted, blue!60,->}}
\draw[myline] (0,0)node[mycircle]{$\pi$} to[out=45,in=135]  (5,1) node[mycircle]{3.414...};
\end{tikzpicture}

Scope

You may want to apply some changes to only a certain part of the code then it can be done use the scope command.

\begin{tikzpicture}[
mycircle/.style={circle, draw=green!60, fill=green!5, ultra thick, minimum size=7mm},
myline/.style={dotted, blue!60,->},
]
\draw[myline] (0,0)node[mycircle]{$\pi$} to[out=45,in=135]  (5,1) node[mycircle]{3.414...};
% following drawing in the scope is shifted along y by 2cm
\begin{scope}[yshift=2cm]
	\draw[myline] (0,0)node[mycircle]{$\pi$} to[out=45,in=135]  (5,1) node[mycircle]{3.414...};
\end{scope}
\end{tikzpicture}

Foreach command

This command is analogous to loops used in programming. It can be realized by "\foreach ⟨variable⟩ in {⟨list of values⟩} ⟨commands⟩".

\foreach \x in {0,...,9} \draw (\x,0) circle (0.4);

Animation in Beamer style

To achieve the animation in the beamer in simplest form, we can print the N number of frames with the object being shifted in N-steps. An example is given following

\begin{frame}
\newcount\p
\animatevalue<3-10>{\p}{0}{100}
\begin{tikzpicture}
	\path(0,0)rectangle(0.75\paperwidth,-0.75\paperheight);
	\path[draw](0,0)..controls +(30:2) and +(40:2)..+(4,-1) node [pos=\p/100,sloped,above]{a};

\end{tikzpicture}
\end{frame}

There are three important steps, as described below.

1. Define a new variableː In above example we used \p as the variable which store the count.
2. Define the range the variable can take. We use the command \animatevalue<3-10>{\p}{0}{100} which says- For the range of 0-100, create 10 values. The <1-10> means the new variable has following set of values \p =[1,2,3,...,10] The <3-10> means the new variable has following set of values \p =[0,0,0,1.25,2.5,...,10].
3. Use the variable for object position, which is done using \path[draw](0,0)..controls +(30:2) and +(40:2)..+(4,-1) node [pos=\p/100,sloped,above]{a};

PGF layers

There are two ways to place the curves in the background--

1. First way is to write the command in the sequential order, i.e. first draw the curves at background (for which coordinates are already available), then draw the curves which comes on top of that, and so on.
2. Second way is to use PGF layers. This is particularly useful, when the background curves coordinates are not already available. They are defined with respect to the upper layer curves.

PGF layers provides following commands

% Define two layers (names could be changed)
\pgfdeclarelayer{background}
\pgfdeclarelayer{foreground}
%% Define there order of layer, here background is the bottom most and foreground is the topmost layer
\pgfsetlayers{background,main,foreground}

%% Whatever you draw here is drawn in the main layer
\draw (1,0) circle (2);

\begin{pgfonlayer}{foreground}  %% draw the curves that should be placed in foreground/top layer
\draw (0,0) arc (0:120:1);
\end{pgfonlayer}

\begin{pgfonlayer}{background}  %% draw the curves that should be placed in background/bottm layer
\draw (0,0) rectangle(2,2);
\end{pgfonlayer}

Pattern Library

This library can provide total 11 types of patterns which can be used to fill the given area. Its color can be chose with the help of keyword pattern color. These patterns are listed as below:

\usetikzlibrary{tikz}   
\usetikzlibrary{patterns}   %% in the beginning of tex file

\begin{document}
\begin{tikzpicture}
\draw[pattern=dots, pattern color=blue] (0,0) rectangle ++(1,1);
\draw[pattern=grid, pattern color=blue] (0,1) rectangle ++(1,1);
\draw[pattern=crosshatch, pattern color=blue] (0,2) rectangle ++(1,1);
\draw[pattern=crosshatch dots, pattern color=blue] (0,3) rectangle ++(1,1);
\draw[pattern=fivepointed stars, pattern color=blue] (0,4) rectangle ++(1,1);
\draw[pattern=sixpointed stars, pattern color=blue] (0,5) rectangle ++(1,1);

\draw[pattern=vertical lines, pattern color=blue] (0,6) rectangle ++(1,1);
\draw[pattern=horizontal lines, pattern color=blue] (0,7) rectangle ++(1,1);
\draw[pattern=north east lines, pattern color=blue] (0,8) rectangle ++(1,1);
\draw[pattern=north west lines, pattern color=blue] (0,9) rectangle ++(1,1);
\end{tikzpicture}
\end{document}

Snake library

This library changes the path structure from a straight line to the following.

\usetikzlibrary{snakes}
\begin{tikzpicture}[thick]
\draw[snake=bumps] (0,0) -- (3,0);                          % Semicircle/bumps along the line.
\draw[snake=zigzag] (0,1)-- (3,1);                          % a zig-zag pattern   
\draw[snake=saw] (0,2) -- (3,2);                            % saw type line  
\draw[snake=brace] (0,3)-- (3,3);                           % a brace between two points
\draw[snake=coil,segment length=4pt] (0,4)-- (3,4);         % like a coil
\draw[snake=coil,segment aspect=0] (0,5) -- (3,5);          % like a sinusoidal wave
\draw[snake=snake] (0,6) -- (3,6);                          % sinusoidal wave (similar to coil)
\draw[snake=expanding waves,segment angle=7] (0,7)-- (3,7); % like a expaning wavefront
\draw[snake=border,segment angle=-45] (0,8) -- (3,8);   % slanted lines along the path
\draw[snake=triangles] (0,9) -- (3,9);                  % Triangles along the path
\draw[snake=ticks] (0,10) -- (3,10);                    % vertical ticks along the path
\draw[snake=crosses] (0,11) -- (3,11);                  % crosses along the path  
\end{tikzpicture}

Some parameters that influence the nature of curve are

segment amplitude=.4mm,

segment length=2mm,

segment object length=.5mm

segment angle = 20

segment aspect=0

raise snake = .2mm

mirror snake

line before snake=1mm, line after snake=1mm, line around snake=1mm,

gap before snakes=1mm, gap after snakes=1mm, gap around snake=1mm

Calc Package

The calc package can be included using the command \usetikzlibrary{calc}. This package can be used to perform simple calculations with coordinates.

• Coordinate algebra.

  \coordinate (A) at (2,3);
  \coordinate (B) at (1.5,2.5);
  \coordinate (B) at ($(A) + (B)$)
  \coordinate (B) at ($(A) - (B)$)
  \coordinate (B) at ($(A) + 2*(A)$)
  

• Finding midpoints

  \coordinate (A) at (0,0);
  \coordinate (B) at (90:3);
  \coordinate (C) at (0:4);
  \coordinate (Ap) at ($(B)!0.5!(C)$);
  \coordinate (Bp) at ($(A)!0.5!(C)$);
  \coordinate (Cp) at ($(A)!0.5!(B)$);
  \draw (A)--(B)--(C)--cycle
        (A)--(Ap) 
        (B)--(Bp) 
        (C)--(Cp);
  

  A special function veclen is provided by the package which can be used to calculate the distance between the points as follows (taken from sec. 14.15 in https://tikz.dev/tikz-paths)

  \usetikzlibrary {calc}
  \begin{tikzpicture}
    \draw [help lines] (0,0) grid (3,3);
    \coordinate (a) at (rnd,rnd);
    \coordinate (b) at (3-rnd,3-rnd);
    \draw (a) -- (b);
    \node (c) at (1,2) {x};
    \draw let \p1 = ($ (a)!(c)!(b) - (c) $),
              \n1 = {veclen(\x1,\y1)}
          in circle [at=(c), radius=\n1];
  \end{tikzpicture}
  

Intersection library

This library is used to find the intersection of any two curves. and example is given below

\usepackage{tikz}
\usetikzlibrary{intersections}

\begin{document}
\begin{tikzpicture}
\draw[name path=line,smooth] (0,5)--(1.5,5);
\draw[name path=curve,smooth] (1.5,6) to[out=270,in=90] (0,3);
\draw[name intersections={of=line and curve}] (intersection-1) circle[radius=0.1];
\end{tikzpicture}
\end{document}

Applying intersection with many curves

\begin{tikzpicture}
\draw[name path=grid] [xstep=3,ystep=2] (0,0) grid (9,8);
\draw[->, name path=line] (2,1) -- (7,7);
\draw[name intersections={of=grid and line, sort by=line, name=i, total=\t}]
\foreach \s in {1,...,\t}{(i-\s) node {\s}};
\end{tikzpicture}

PGF Maths

A number of mathematical operation can be performed using the \usepackage[pgfmath] which provides a core command \pgfmathparse and return the result in \pgfmathresult. A few example are

\pgfmathparse{add(75,6)} \pgfmathresult

In above example we have used the function add(x,y). A substitute for above command is \pgfmathadd{x}{y}.

A number of function available, which are provided as following. The substitute command can be obtained as for the add function, i.e. by using a prefix \pgfmath with command name.

• add(a,b), subtract (a,b), multiply(a,b), divide(a,b), div(a,b), neg (-a), sqrt(a), pow (a^b), exp(a), ln(a), log10(a), log2(a), abs(a), mod(a,b)
• round(a), floor(a), ceil(a), int(a), frac(a)
• check for type: isodd(a), iseven(a), isprime(a)
• Constants: e, pi
• conversion: rad(x), deg(y)
• Trigonometric functions: sin(x), cos(x), tan(x), sec(x), cosec(x) , cot(x),
• Inverse trigonometric functions: asin(x), acos(x), atan(x)
• Comparison: equal(x,y), greater(x,y), less(x,y), notequal(x,y), notgreater(x,y), notless(x,y),
• Logical functions: and(x,y), or(x,y), not(x), ifthenelse(x,y,z), and logical constants as-- true, false.
• Random no generator: rnd, rand, random(x,y)
• Miscelleneous: Minimum/Maximum from an list of elements : min(x1,x2,...,xn), max(x1,x2,...,xn), Length of a vector: veclen(x,y) Access i th element of an given array x: array({x1,x2,x3,...,xn},i)
• Computing angles: \pgfmathanglebetweenpoints{P}{Q} : Finds the angle of the line passing through the points P to Q. \pgfmathanglebetweenlines{P1}{Q1}{P2}{Q2} : Finds the angle between the two lines, L1 and L2, where L1 passing through P1 and Q1, and second line passing through P2 and Q2.

Commands		Description
\pgfmathsetlength{name}{value}	\pgfmathaddtolength{name}{value}	Set the corresponding "name" tex register for given value
\pgfmathsetcount{name}{value}	\pgfmathaddtocount{name}{value}
\pgfmathsetcounter{name}{value}	\pgfmathaddtocounter{name}{value}
\pgfmathsetmacro{name}{value}	\pgfmathtruncatemacro{name}{value}

PGF Plots

PGF also has a math engine which enables you to plot functions:

\draw [domain=xmin:xmax] plot (\x, {function});

Many functions are possible, including factorial(\x), sqrt(\x), pow(\x,y), exp(\x), ln(\x), log10(\x), log2(\x), abs(\x), mod(\x,y), round(\x), floor(\x), ceil(\x), sin(\x), cos(\x), tan(\x), min(\x,y,), and max(\x,y).

Noteː

1) The trigonometric functions assume that x is in degrees; to express x in radians follow it with the notation "r", e.g., sin(\x r).

2) Two useful constants are e =2.718281828, and pi = 3.141592654 can be specified directly using e and pi in the expression.

An example with two functions:

\draw [help lines] (-2,0) grid (2,4); \draw [->] (-2.2,0) -- (2.2,0); \draw [->] (0,0) -- (0,4.2); \draw [green, thick, domain=-2:2] plot (\x, {4-\x*\x}); \draw [domain=-2:2, samples=50] plot (\x, {1+cos(pi*\x r)});

Examples

Example 1

\documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture} \draw[thick,rounded corners=8pt] (0,0) -- (0,2) -- (1,3.25) -- (2,2) -- (2,0) -- (0,2) -- (2,2) -- (0,0) -- (2,0); \end{tikzpicture} \end{document}

Example 2

\documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture}[scale=3] \draw[step=.5cm, gray, very thin] (-1.2,-1.2) grid (1.2,1.2); \filldraw[fill=green!20,draw=green!50!black] (0,0) -- (3mm,0mm) arc (0:30:3mm) -- cycle; \draw[->] (-1.25,0) -- (1.25,0) coordinate (x axis); \draw[->] (0,-1.25) -- (0,1.25) coordinate (y axis); \draw (0,0) circle (1cm); \draw[very thick,red] (30:1cm) -- node[left,fill=white] {$\sin \alpha$} (30:1cm |- x axis); \draw[very thick,blue] (30:1cm |- x axis) -- node[below=2pt,fill=white] {$\cos \alpha$} (0,0); \draw (0,0) -- (30:1cm); \foreach \x/\xtext in {-1, -0.5/-\frac{1}{2}, 1} \draw (\x cm,1pt) -- (\x cm,-1pt) node[anchor=north,fill=white] {$\xtext$}; \foreach \y/\ytext in {-1, -0.5/-\frac{1}{2}, 0.5/\frac{1}{2}, 1} \draw (1pt,\y cm) -- (-1pt,\y cm) node[anchor=east,fill=white] {$\ytext$}; \end{tikzpicture} \end{document}

Example 3: A Torus

\documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture} \draw (-1,0) to[bend left] (1,0); \draw (-1.2,.1) to[bend right] (1.2,.1); \draw[rotate=0] (0,0) ellipse (100pt and 50pt); \end{tikzpicture} \end{document}

Example 4: Some functions

\documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture}[domain=0:4] \draw[very thin,color=gray] (-0.1,-1.1) grid (3.9,3.9); \draw[->] (-0.2,0) -- (4.2,0) node[right] {$x$}; \draw[->] (0,-1.2) -- (0,4.2) node[above] {$f(x)$}; \draw[color=red] plot (\x,\x) node[right] {$f(x) =x$}; \draw[color=blue] plot (\x,{sin(\x r)}) node[right] {$f(x) = \sin x$}; \draw[color=orange] plot (\x,{0.05*exp(\x)}) node[right] {$f(x) = \frac{1}{20} \mathrm e^x$}; \end{tikzpicture} \end{document}

References

https://tikz.dev/http://tug.ctan.org/info/visualtikz/VisualTikZ.pdf