RAC Attack - Oracle Cluster Database at Home/Configure Node 1
Appearance
Prev: Linux Install
Create Cluster (e)
- Create Interconnect
- Create Shared Disks
- Copy VM
- Configure Disks
- Configure Node 1
- Configure Node 2
- SSH and CVU
Next: Grid Install (ASM or Shared Filesystem)
After completing the previous lab, you should already be logged in as the oracle user on collabn1. You should already have a terminal open, where you are currently switched to the root user.
- As the root user, CONFIRM that the IP address if eth0 starts with 192.168.78 and that the IP address of eth1 starts with 172.16.100. [root@collabn1 ~]# ifconfig|grep net eth0 Link encap:Ethernet HWaddr 00:0C:29:07:F5:C0 inet addr:192.168.78.128 Bcast:192.168.78.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe07:f5c0/64 Scope:Link eth1 Link encap:Ethernet HWaddr 00:0C:29:07:F5:CA inet addr:172.16.100.128 Bcast:172.16.100.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe07:f5ca/64 Scope:Link inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host
- Update the IP addresses by directly editing the linux network configuration files. Update the BOOTPROTO line and add the remaining lines. [root@collabn1 ~]# cd /etc/sysconfig/network-scripts [root@collabn1 network-scripts]# gedit ifcfg-eth0 BOOTPROTO=none IPADDR=192.168.78.51 NETMASK=255.255.255.0 GATEWAY=192.168.78.2 [root@collabn1 network-scripts]# gedit ifcfg-eth1 BOOTPROTO=none IPADDR=172.16.100.51 NETMASK=255.255.255.0
- Update the DNS search domain [root@collabn1 network-scripts]# gedit /etc/resolv.conf search vm.ardentperf.com nameserver 192.168.78.2
-
As root, restart the network services by typing service network restart. Then confirm the new ip addresses with ifconfig. Also confirm the search domain by inspecting /etc/resolv.conf – if the file has reverted then edit it again. (When I wrote this lab, the change stuck after the second time I edited the file.)
You must perform this step in VMware; do not use PuTTY.
- Edit /etc/ hosts. EDIT the line with 127.0.0.1 and then ADD all of the other lines below: [root@collabn1 etc]# vi /etc/hosts 192.168.78.51 collabn1 collabn1.vm.ardentperf.com 192.168.78.61 collabn1-vip collabn1-vip.vm.ardentperf.com 172.16.100.51 collabn1-priv collabn1-priv.vm.ardentperf.com 192.168.78.52 collabn2 collabn2.vm.ardentperf.com 192.168.78.62 collabn2-vip collabn2-vip.vm.ardentperf.com 172.16.100.52 collabn2-priv collabn2-priv.vm.ardentperf.com 192.168.78.250 collab-scan collab-scan.vm.ardentperf.com 192.168.78.251 collab-gns collab-gns.vm.ardentperf.com ::1 localhost6.localdomain6 localhost6 127.0.0.1 localhost.localdomain localhost